Merge branch 'upstream-fixes' into upstream

Documentation/DocBook/kernel-api.tmpl

@@ -58,6 +58,9 @@
 !Iinclude/linux/ktime.h
 !Iinclude/linux/hrtimer.h
 !Ekernel/hrtimer.c
+     </sect1>
+     <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
      </sect1>
      <sect1><title>Internal Functions</title>
 !Ikernel/exit.c
@@ -300,7 +303,7 @@ X!Ekernel/module.c
      </sect1>
 
      <sect1><title>Resources Management</title>
-!Ekernel/resource.c
+!Ikernel/resource.c
      </sect1>
 
      <sect1><title>MTRR Handling</title>
@@ -312,9 +315,7 @@ X!Ekernel/module.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
 !Edrivers/pci/pci-acpi.c
-<!-- kerneldoc does not understand __devinit
-X!Edrivers/pci/search.c
- -->
+!Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
 <!-- FIXME: Removed for now since no structured comments in source

Documentation/SubmittingPatches

@@ -10,7 +10,9 @@ kernel, the process can sometimes be daunting if you're not familiar
 with "the system."  This text is a collection of suggestions which
 can greatly increase the chances of your change being accepted.
 
-If you are submitting a driver, also read Documentation/SubmittingDrivers.
+Read Documentation/SubmitChecklist for a list of items to check
+before submitting code.  If you are submitting a driver, also read
+Documentation/SubmittingDrivers.
 
 
 
@@ -74,9 +76,6 @@ There are a number of scripts which can aid in this:
 Quilt:
 http://savannah.nongnu.org/projects/quilt
 
-Randy Dunlap's patch scripts:
-http://www.xenotime.net/linux/scripts/patching-scripts-002.tar.gz
-
 Andrew Morton's patch scripts:
 http://www.zip.com.au/~akpm/linux/patches/
 Instead of these scripts, quilt is the recommended patch management
@@ -484,7 +483,7 @@ Greg Kroah-Hartman "How to piss off a kernel subsystem maintainer".
   <http://www.kroah.com/log/2005/10/19/>
   <http://www.kroah.com/log/2006/01/11/>
 
-NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!.
+NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
 
 Kernel Documentation/CodingStyle
@@ -493,4 +492,3 @@ Kernel Documentation/CodingStyle
 Linus Torvald's mail on the canonical patch format:
   <http://lkml.org/lkml/2005/4/7/183>
 --
-Last updated on 17 Nov 2005.

Documentation/accounting/delay-accounting.txt

@@ -64,11 +64,13 @@ Compile the kernel with
 	CONFIG_TASK_DELAY_ACCT=y
 	CONFIG_TASKSTATS=y
 
-Enable the accounting at boot time by adding
-the following to the kernel boot options
-	delayacct
+Delay accounting is enabled by default at boot up.
+To disable, add
+   nodelayacct
+to the kernel boot options. The rest of the instructions
+below assume this has not been done.
 
-and after the system has booted up, use a utility
+After the system has booted up, use a utility
 similar to  getdelays.c to access the delays
 seen by a given task or a task group (tgid).
 The utility also allows a given command to be

Documentation/cpu-hotplug.txt

@@ -251,16 +251,24 @@ A: This is what you would need in your kernel code to receive notifications.
 		return NOTIFY_OK;
 	}
 
-	static struct notifier_block foobar_cpu_notifer =
+	static struct notifier_block __cpuinitdata foobar_cpu_notifer =
 	{
 	   .notifier_call = foobar_cpu_callback,
 	};
 
+You need to call register_cpu_notifier() from your init function.
+Init functions could be of two types:
+1. early init (init function called when only the boot processor is online).
+2. late init (init function called _after_ all the CPUs are online).
 
-In your init function,
+For the first case, you should add the following to your init function
 
 	register_cpu_notifier(&foobar_cpu_notifier);
 
+For the second case, you should add the following to your init function
+
+	register_hotcpu_notifier(&foobar_cpu_notifier);
+
 You can fail PREPARE notifiers if something doesn't work to prepare resources.
 This will stop the activity and send a following CANCELED event back.
 

Documentation/devices.txt

@@ -2565,10 +2565,10 @@ Your cooperation is appreciated.
 		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
-		0 = /dev/uba		First USB block device
-		8 = /dev/ubb		Second USB block device
-		16 = /dev/ubc		Thrid USB block device
-		...
+		  0 = /dev/uba		First USB block device
+		  8 = /dev/ubb		Second USB block device
+		 16 = /dev/ubc		Third USB block device
+		    ...
 
 181 char	Conrad Electronic parallel port radio clocks
 		  0 = /dev/pcfclock0	First Conrad radio clock

Documentation/infiniband/ipoib.txt

@@ -51,8 +51,6 @@ Debugging Information
 
 References
 
-  IETF IP over InfiniBand (ipoib) Working Group
-    http://ietf.org/html.charters/ipoib-charter.html
   Transmission of IP over InfiniBand (IPoIB) (RFC 4391)
     http://ietf.org/rfc/rfc4391.txt 
   IP over InfiniBand (IPoIB) Architecture (RFC 4392)

Documentation/initrd.txt

@@ -72,6 +72,22 @@ initrd adds the following new options:
     initrd is mounted as root, and the normal boot procedure is followed,
     with the RAM disk still mounted as root.
 
+Compressed cpio images
+----------------------
+
+Recent kernels have support for populating a ramdisk from a compressed cpio
+archive, on such systems, the creation of a ramdisk image doesn't need to
+involve special block devices or loopbacks, you merely create a directory on
+disk with the desired initrd content, cd to that directory, and run (as an
+example):
+
+find . | cpio --quiet -c -o | gzip -9 -n > /boot/imagefile.img
+
+Examining the contents of an existing image file is just as simple:
+
+mkdir /tmp/imagefile
+cd /tmp/imagefile
+gzip -cd /boot/imagefile.img | cpio -imd --quiet
 
 Installation
 ------------

Documentation/kbuild/makefiles.txt

@@ -407,6 +407,20 @@ more details, with real examples.
 	The second argument is optional, and if supplied will be used
 	if first argument is not supported.
 
+    ld-option
+    	ld-option is used to check if $(CC) when used to link object files
+	supports the given option.  An optional second option may be
+	specified if first option are not supported.
+
+	Example:
+		#arch/i386/kernel/Makefile
+		vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv)
+
+	In the above example vsyscall-flags will be assigned the option
+	-Wl$(comma)--hash-style=sysv if it is supported by $(CC).
+	The second argument is optional, and if supplied will be used
+	if first argument is not supported.
+
     cc-option
 	cc-option is used to check if $(CC) support a given option, and not
 	supported to use an optional second option.

Documentation/kernel-parameters.txt

@@ -448,8 +448,6 @@ running once the system is up.
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
-	delayacct	[KNL] Enable per-task delay accounting
-
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
@@ -1031,6 +1029,8 @@ running once the system is up.
 
 	nocache		[ARM]
 
+	nodelayacct	[KNL] Disable per-task delay accounting
+
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
 
 	noexec		[IA-64]

Documentation/usb/proc_usb_info.txt

@@ -59,7 +59,7 @@ bind to an interface (or perhaps several) using an ioctl call.  You
 would issue more ioctls to the device to communicate to it using
 control, bulk, or other kinds of USB transfers.  The IOCTLs are
 listed in the <linux/usbdevice_fs.h> file, and at this writing the
-source code (linux/drivers/usb/devio.c) is the primary reference
+source code (linux/drivers/usb/core/devio.c) is the primary reference
 for how to access devices through those files.
 
 Note that since by default these BBB/DDD files are writable only by

Documentation/usb/usb-help.txt

@@ -5,8 +5,7 @@ For USB help other than the readme files that are located in
 Documentation/usb/*, see the following:
 
 Linux-USB project:  http://www.linux-usb.org
-  mirrors at        http://www.suse.cz/development/linux-usb/
-         and        http://usb.in.tum.de/linux-usb/
+  mirrors at        http://usb.in.tum.de/linux-usb/
          and        http://it.linux-usb.org
 Linux USB Guide:    http://linux-usb.sourceforge.net
 Linux-USB device overview (working devices and drivers):