* pm-opp-fixes:
PM / OPP: Remove useless check
* pm-cpufreq-fixes:
intel_pstate: Fix intel_pstate_get()
cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
cpufreq: st: enable selective initialization based on the platform
* pm-cpuidle-fixes:
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
Simon Horman says:
====================
Second Round of IPVS Updates for v4.7
please consider these enhancements to the IPVS. They allow its DoS
mitigation strategy effective in conjunction with the SIP persistence
engine.
====================
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f;
Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM
(35.5), the ratio bits are bit 8-15.
Ignoring the upper bits can result in an incorrect tsc ratio, which causes the
TSC calibration and the Local APIC timer frequency to be incorrect.
Fix this problem by masking 0xff instead.
[ tglx: Massaged changelog ]
Fixes: 7da7c15613 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs"
Signed-off-by: Chen Yu <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Cc: Bin Gao <[email protected]>
Cc: Len Brown <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
We already include netns address in the hash and compare the netns pointers
during lookup, so even if namespaces have overlapping addresses entries
will be spread across the expectation table.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
DoS protection policy that deletes connections to avoid out of memory is
currently not effective for SIP-pe plus OPS-mode for two reasons:
1) connection templates (holding SIP call-id) are always skipped in
ip_vs_random_dropentry()
2) in_pkts counter (used by drop_entry algorithm) is not incremented
for connection templates
This patch addresses such problems with the following changes:
a) connection templates associated (via their dest) to virtual-services
configured in OPS mode are included in ip_vs_random_dropentry()
monitoring. This applies to SIP-pe over UDP (which requires OPS mode),
but is more general principle: when OPS is controlled by templates
memory can be used only by templates themselves, since OPS conns are
deleted after packet is forwarded.
b) OPS connections, if controlled by a template, cause increment of
in_pkts counter of their template. This is already happening but only
in case director is in master-slave mode (see ip_vs_sync_conn()).
Signed-off-by: Marco Angaroni <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
The i40e_client_ops structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Newly added code in i40e_vc_config_promiscuous_mode_msg() is indented
in a way that gcc rightly complains about:
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function 'i40e_vc_config_promiscuous_mode_msg':
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1543:4: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
if (f->vlan >= 0 && f->vlan <= I40E_MAX_VLANID)
^~
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1550:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
aq_err = pf->hw.aq.asq_last_status;
From the context, it looks like the aq_err assignment was meant to be
inside of the conditional expression, so I'm adding the appropriate
curly braces now.
Signed-off-by: Arnd Bergmann <[email protected]>
Fixes: 5676a8b9cd ("i40e: Add VF promiscuous mode driver support")
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
When testing on systems with very limited amounts of RAM, a bug was
found where, while changing the number of descriptors using ethtool,
the driver didn't test the limits of system memory before permanently
assuming it would be able to get receive buffer memory.
Work around this issue by pre-allocation of the receive buffer
memory, in the "ghost" ring, which is then used during reinit
using the new ring length.
Change-Id: I92d7a5fb59a6c884b2efdd1ec652845f101c3359
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Allocate the correct number of RX buffers, and don't fiddle with
next_to_use. The common RX code handles all of this. This fixes a memory
leak of one page each time the driver is opened.
Change-Id: Id06eca353086e084921f047acad28c14745684ee
Signed-off-by: Mitch Williams <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
The hardware supports a 16 byte descriptor for receive, but the
driver was never using it in production. There was no performance
benefit to the real driver of 16 byte descriptors, so drop a whole
lot of complexity while getting rid of the code.
Also since the previous patch made us use no-split mode all the
time, drop any support in the driver for any other value in dtype
and assume it is always zero (aka no-split).
Hooray for code removal!
Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
This is part 2 of the Rx refactor series, just including
changes to i40evf.
This refactor aligns the receive routine with the one in
ixgbe which was highly optimized. This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.
In order to do this:
- consolidate the receive path into a single function that doesn't
use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove VF ethtool control over packet split
- remove priv_flags interface since it is unused
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.
Some of the split related context set up code stays in
i40e_virtchnl_pf.c in case an older VF driver tries to load
and still wants to use packet split.
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
This is part 1 of the Rx refactor series, just including
changes to i40e.
This refactor aligns the receive routine with the one in
ixgbe which was highly optimized. This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.
In order to do this:
- consolidate the receive path into a single function that doesn't
use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove ethtool control over packet split
Change-ID: I5ca100721de65992aa0114f8b4bac844b84758e0
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Merge fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <[email protected]>:
byteswap: try to avoid __builtin_constant_p gcc bug
lib/stackdepot: avoid to return 0 handle
mm: fix kcompactd hang during memory offlining
modpost: fix module autoloading for OF devices with generic compatible property
proc: prevent accessing /proc/<PID>/environ until it's ready
mm/zswap: provide unique zpool name
mm: thp: kvm: fix memory corruption in KVM with THP enabled
MAINTAINERS: fix Rajendra Nayak's address
mm, cma: prevent nr_isolated_* counters from going negative
mm: update min_free_kbytes from khugepaged after core initialization
huge pagecache: mmap_sem is unlocked when truncation splits pmd
rapidio/mport_cdev: fix uapi type definitions
mm: memcontrol: let v2 cgroups follow changes in system swappiness
mm: thp: correct split_huge_pages file permission
get_bridge_ifindices() is used from the old "deviceless" bridge ioctl
calls which aren't called with rtnl held. The comment above says that it is
called with rtnl but that is not really the case.
Here's a sample output from a test ASSERT_RTNL() which I put in
get_bridge_ifindices and executed "brctl show":
[ 957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30)
[ 957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G W O
4.6.0-rc4+ #157
[ 957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[ 957.423009] 0000000000000000 ffff880058adfdf0 ffffffff8138dec5
0000000000000400
[ 957.423009] ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32
0000000000000001
[ 957.423009] 00007ffec1a444b0 0000000000000400 ffff880053c19130
0000000000008940
[ 957.423009] Call Trace:
[ 957.423009] [<ffffffff8138dec5>] dump_stack+0x85/0xc0
[ 957.423009] [<ffffffffa05ead32>]
br_ioctl_deviceless_stub+0x212/0x2e0 [bridge]
[ 957.423009] [<ffffffff81515beb>] sock_ioctl+0x22b/0x290
[ 957.423009] [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700
[ 957.423009] [<ffffffff8126c159>] SyS_ioctl+0x79/0x90
[ 957.423009] [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1
Since it only reads bridge ifindices, we can use rcu to safely walk the net
device list. Also remove the wrong rtnl comment above.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The peer may be expecting a reply having sent a request and then done a
shutdown(SHUT_WR), so tearing down the whole socket at this point seems
wrong and breaks for me with a client which does a SHUT_WR.
Looking at other socket family's stream_recvmsg callbacks doing a shutdown
here does not seem to be the norm and removing it does not seem to have
had any adverse effects that I can see.
I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact
on the vmci transport.
Signed-off-by: Ian Campbell <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Stefan Hajnoczi <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Andy King <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Jorgen Hansen <[email protected]>
Cc: Adit Ranadive <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Use htons instead of unconditionally byte swapping nexthdr. On a little
endian systems shifting the byte is correct behavior, but it results in
incorrect csums on big endian architectures.
Fixes: f8c6455bb0 ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Carol Soto <[email protected]>
Tested-by: Carol Soto <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The dma_alloc_coherent() function returns a virtual address which can
be used for coherent access to the underlying memory. On some
architectures, like arm64, undefined behavior results if this memory is
also accessed via virtual mappings that are not coherent. Because of
their undefined nature, operations like virt_to_page() return garbage
when passed virtual addresses obtained from dma_alloc_coherent(). Any
subsequent mappings via vmap() of the garbage page values are unusable
and result in bad things like bus errors (synchronous aborts in ARM64
speak).
The mlx4 driver contains code that does the equivalent of:
vmap(virt_to_page(dma_alloc_coherent)), this results in an OOPs when the
device is opened.
Prevent Ethernet driver to run this problematic code by forcing it to
allocate contiguous memory. As for the Infiniband driver, at first we
are trying to allocate contiguous memory, but in case of failure roll
back to work with fragmented memory.
Signed-off-by: Haggai Abramovsky <[email protected]>
Signed-off-by: Yishai Hadas <[email protected]>
Reported-by: David Daney <[email protected]>
Tested-by: Sinan Kaya <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
As part of the rx-refactor, the dtype variable in the i40e_ring
struct is no longer used, so remove it.
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Refactor the interpretation of a tunnel. This removes
some code and lets us start using the hardware's parsing.
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Pull libnvdimm fixes from Dan Williams:
- a fix for the persistent memory 'struct page' driver. The
implementation overlooked the fact that pages are allocated in 2MB
units leading to -ENOMEM when establishing some configurations.
It's tagged for -stable as the problem was introduced with the
initial implementation in 4.5.
- The new "error status translation" routine, introduced with the 4.6
updates to the nfit driver, missed a necessary path in
acpi_nfit_ctl().
The end result is that we are falsely assuming commands complete
successfully when the embedded status says otherwise.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix translation of command status results
libnvdimm, pfn: fix memmap reservation sizing
This is another attempt to avoid a regression in wwn_to_u64() after that
started using get_unaligned_be64(), which in turn ran into a bug on
gcc-4.9 through 6.1.
The regression got introduced due to the combination of two separate
workarounds (commits e3bde9568d: "include/linux/unaligned: force
inlining of byteswap operations" and ef3fb2422f: "scsi: fc: use
get/put_unaligned64 for wwn access") that each try to sidestep distinct
problems with gcc behavior (code growth and increased stack usage).
Unfortunately after both have been applied, a more serious gcc bug has
been uncovered, leading to incorrect object code that discards part of a
function and causes undefined behavior.
As part of this problem is how __builtin_constant_p gets evaluated on an
argument passed by reference into an inline function, this avoids the
use of __builtin_constant_p() for all architectures that set
CONFIG_ARCH_USE_BUILTIN_BSWAP. Most architectures do not set
ARCH_SUPPORTS_OPTIMIZED_INLINING, which means they probably do not
suffer from the problem in the qla2xxx driver, but they might still run
into it elsewhere.
Both of the original workarounds were only merged in the 4.6 kernel, and
the bug that is fixed by this patch should only appear if both are
there, so we probably don't need to backport the fix. On the other
hand, it works by simplifying the code path and should not have any
negative effects.
[[email protected]: fix older gcc warnings]
(http://lkml.kernel.org/r/12243652.bxSxEgjgfk@wuerfel)
Link: https://lkml.org/lkml/headers/2016/4/12/1103
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70232
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646
Fixes: e3bde9568d ("include/linux/unaligned: force inlining of byteswap operations")
Fixes: ef3fb2422f ("scsi: fc: use get/put_unaligned64 for wwn access")
Link: http://lkml.kernel.org/r/1780465.XdtPJpi8Tt@wuerfel
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Josh Poimboeuf <[email protected]>
Tested-by: Josh Poimboeuf <[email protected]> # on gcc-5.3
Tested-by: Quinn Tran <[email protected]>
Cc: Martin Jambor <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Thomas Graf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Himanshu Madhani <[email protected]>
Cc: Jan Hubicka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Recently, we allow to save the stacktrace whose hashed value is 0. It
causes the problem that stackdepot could return 0 even if in success.
User of stackdepot cannot distinguish whether it is success or not so we
need to solve this problem. In this patch, 1 bit are added to handle
and make valid handle none 0 by setting this bit. After that, valid
handle will not be 0 and 0 handle will represent failure correctly.
Fixes: 33334e2576 ("lib/stackdepot.c: allow the stack trace hash to be zero")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Joonsoo Kim <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Assume memory47 is the last online block left in node1. This will hang:
# echo offline > /sys/devices/system/node/node1/memory47/state
After a couple of minutes, the following pops up in dmesg:
INFO: task bash:957 blocked for more than 120 seconds.
Not tainted 4.6.0-rc6+ #6
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
bash D ffff8800b7adbaf8 0 957 951 0x00000000
Call Trace:
schedule+0x35/0x80
schedule_timeout+0x1ac/0x270
wait_for_completion+0xe1/0x120
kthread_stop+0x4f/0x110
kcompactd_stop+0x26/0x40
__offline_pages.constprop.28+0x7e6/0x840
offline_pages+0x11/0x20
memory_block_action+0x73/0x1d0
memory_subsys_offline+0x47/0x60
device_offline+0x86/0xb0
store_mem_state+0xda/0xf0
dev_attr_store+0x18/0x30
sysfs_kf_write+0x37/0x40
kernfs_fop_write+0x11d/0x170
__vfs_write+0x37/0x120
vfs_write+0xa9/0x1a0
SyS_write+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xa4
kcompactd is waiting for kcompactd_max_order > 0 when it's woken up to
actually exit. Check kthread_should_stop() to break out of the wait.
Fixes: 698b1b306 ("mm, compaction: introduce kcompactd").
Reported-by: Reza Arbab <[email protected]>
Tested-by: Reza Arbab <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Since the wildcard at the end of OF module aliases is gone, autoloading
of modules that don't match a device's last (most generic) compatible
value fails.
For example the CODA960 VPU on i.MX6Q has the SoC specific compatible
"fsl,imx6q-vpu" and the generic compatible "cnm,coda960". Since the
driver currently only works with knowledge about the SoC specific
integration, it doesn't list "cnm,cod960" in the module device table.
This results in the device compatible
"of:NvpuT<NULL>Cfsl,imx6q-vpuCcnm,coda960" not matching the module alias
"of:N*T*Cfsl,imx6q-vpu" anymore, whereas before commit 2f632369ab
("modpost: don't add a trailing wildcard for OF module aliases") it
matched the module alias "of:N*T*Cfsl,imx6q-vpu*".
This patch adds two module aliases for each compatible, one without the
wildcard and one with "C*" appended.
$ modinfo coda | grep imx6q
alias: of:N*T*Cfsl,imx6q-vpuC*
alias: of:N*T*Cfsl,imx6q-vpu
Fixes: 2f632369ab ("modpost: don't add a trailing wildcard for OF module aliases")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Sjoerd Simons <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]> [4.5+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
If /proc/<PID>/environ gets read before the envp[] array is fully set up
in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to
read more bytes than are actually written, as env_start will already be
set but env_end will still be zero, making the range calculation
underflow, allowing to read beyond the end of what has been written.
Fix this as it is done for /proc/<PID>/cmdline by testing env_end for
zero. It is, apparently, intentionally set last in create_*_tables().
This bug was found by the PaX size_overflow plugin that detected the
arithmetic underflow of 'this_len = env_end - (env_start + src)' when
env_end is still zero.
The expected consequence is that userland trying to access
/proc/<PID>/environ of a not yet fully set up process may get
inconsistent data as we're in the middle of copying in the environment
variables.
Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461
Signed-off-by: Mathias Krause <[email protected]>
Cc: Emese Revfy <[email protected]>
Cc: Pax Team <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Cyrill Gorcunov <[email protected]>
Cc: Jarod Wilson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Instead of using "zswap" as the name for all zpools created, add an
atomic counter and use "zswap%x" with the counter number for each zpool
created, to provide a unique name for each new zpool.
As zsmalloc, one of the zpool implementations, requires/expects a unique
name for each pool created, zswap should provide a unique name. The
zsmalloc pool creation does not fail if a new pool with a conflicting
name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case,
zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to
change its compressor parameter if its zpool is zsmalloc; it also will
be unable to change its zpool parameter back to zsmalloc, if it has any
existing old zpool using zsmalloc with page(s) in it. Attempts to
change the parameters will result in failure to create the zpool. This
changes zswap to provide a unique name for each zpool creation.
Fixes: f1c54846ee ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <[email protected]>
Reported-by: Sergey Senozhatsky <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
After the THP refcounting change, obtaining a compound pages from
get_user_pages() no longer allows us to assume the entire compound page
is immediately mappable from a secondary MMU.
A secondary MMU doesn't want to call get_user_pages() more than once for
each compound page, in order to know if it can map the whole compound
page. So a secondary MMU needs to know from a single get_user_pages()
invocation when it can map immediately the entire compound page to avoid
a flood of unnecessary secondary MMU faults and spurious
atomic_inc()/atomic_dec() (pages don't have to be pinned by MMU notifier
users).
Ideally instead of the page->_mapcount < 1 check, get_user_pages()
should return the granularity of the "page" mapping in the "mm" passed
to get_user_pages(). However it's non trivial change to pass the "pmd"
status belonging to the "mm" walked by get_user_pages up the stack (up
to the caller of get_user_pages). So the fix just checks if there is
not a single pte mapping on the page returned by get_user_pages, and in
turn if the caller can assume that the whole compound page is mapped in
the current "mm" (in a pmd_trans_huge()). In such case the entire
compound page is safe to map into the secondary MMU without additional
get_user_pages() calls on the surrounding tail/head pages. In addition
of being faster, not having to run other get_user_pages() calls also
reduces the memory footprint of the secondary MMU fault in case the pmd
split happened as result of memory pressure.
Without this fix after a MADV_DONTNEED (like invoked by QEMU during
postcopy live migration or balloning) or after generic swapping (with a
failure in split_huge_page() that would only result in pmd splitting and
not a physical page split), KVM would map the whole compound page into
the shadow pagetables, despite regular faults or userfaults (like
UFFDIO_COPY) may map regular pages into the primary MMU as result of the
pte faults, leading to the guest mode and userland mode going out of
sync and not working on the same memory at all times.
Any other secondary MMU notifier manager (KVM is just one of the many
MMU notifier users) will need the same information if it doesn't want to
run a flood of get_user_pages_fast and it can support multiple
granularity in the secondary MMU mappings, so I think it is justified to
be exposed not just to KVM.
The other option would be to move transparent_hugepage_adjust to
mm/huge_memory.c but that currently has all kind of KVM data structures
in it, so it's definitely not a cut-and-paste work, so I couldn't do a
fix as cleaner as this one for 4.6.
Signed-off-by: Andrea Arcangeli <[email protected]>
Cc: "Dr. David Alan Gilbert" <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: "Li, Liang Z" <[email protected]>
Cc: Amit Shah <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
/proc/sys/vm/stat_refresh warns nr_isolated_anon and nr_isolated_file go
increasingly negative under compaction: which would add delay when
should be none, or no delay when should delay. The bug in compaction
was due to a recent mmotm patch, but much older instance of the bug was
also noticed in isolate_migratepages_range() which is used for CMA and
gigantic hugepage allocations.
The bug is caused by putback_movable_pages() in an error path
decrementing the isolated counters without them being previously
incremented by acct_isolated(). Fix isolate_migratepages_range() by
removing the error-path putback, thus reaching acct_isolated() with
migratepages still isolated, and leaving putback to caller like most
other places do.
Fixes: edc2ca6124 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()")
[[email protected]: expanded the changelog]
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Acked-by: Joonsoo Kim <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Khugepaged attempts to raise min_free_kbytes if its set too low.
However, on boot khugepaged sets min_free_kbytes first from
subsys_initcall(), and then the mm 'core' over-rides min_free_kbytes
after from init_per_zone_wmark_min(), via a module_init() call.
Khugepaged used to use a late_initcall() to set min_free_kbytes (such
that it occurred after the core initialization), however this was
removed when the initialization of min_free_kbytes was integrated into
the starting of the khugepaged thread.
The fix here is simply to invoke the core initialization using a
core_initcall() instead of module_init(), such that the previous
initialization ordering is restored. I didn't restore the
late_initcall() since start_stop_khugepaged() already sets
min_free_kbytes via set_recommended_min_free_kbytes().
This was noticed when we had a number of page allocation failures when
moving a workload to a kernel with this new initialization ordering. On
an 8GB system this restores min_free_kbytes back to 67584 from 11365
when CONFIG_TRANSPARENT_HUGEPAGE=y is set and either
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y or
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y.
Fixes: 79553da293 ("thp: cleanup khugepaged startup")
Signed-off-by: Jason Baron <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
zap_pmd_range()'s CONFIG_DEBUG_VM !rwsem_is_locked(&mmap_sem) BUG() will
be invalid with huge pagecache, in whatever way it is implemented:
truncation of a hugely-mapped file to an unhugely-aligned size would
easily hit it.
(Although anon THP could in principle apply khugepaged to private file
mappings, which are not excluded by the MADV_HUGEPAGE restrictions, in
practice there's a vm_ops check which excludes them, so it never hits
this BUG() - there's no interface to "truncate" an anonymous mapping.)
We could complicate the test, to check i_mmap_rwsem also when there's a
vm_file; but my inclination was to make zap_pmd_range() more readable by
simply deleting this check. A search has shown no report of the issue
in the years since commit e0897d75f0 ("mm, thp: print useful
information when mmap_sem is unlocked in zap_pmd_range") expanded it
from VM_BUG_ON() - though I cannot point to what commit I would say then
fixed the issue.
But there are a couple of other patches now floating around, neither yet
in the tree: let's agree to retain the check as a VM_BUG_ON_VMA(), as
Matthew Wilcox has done; but subject to a vma_is_anonymous() check, as
Kirill Shutemov has done. And let's get this in, without waiting for
any particular huge pagecache implementation to reach the tree.
Matthew said "We can reproduce this BUG() in the current Linus tree with
DAX PMDs".
Signed-off-by: Hugh Dickins <[email protected]>
Tested-by: Matthew Wilcox <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andres Lagar-Cavilla <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Ning Qu <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Andres Lagar-Cavilla <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cgroup2 currently doesn't have a per-cgroup swappiness setting. We
might want to add one later - that's a different discussion - but until
we do, the cgroups should always follow the system setting. Otherwise
it will be unchangeably set to whatever the ancestor inherited from the
system setting at the time of cgroup creation.
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Vladimir Davydov <[email protected]>
Cc: <[email protected]> [4.5]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
split_huge_pages doesn't support get method at all, so the read
permission sounds confusing, change the permission to write only.
And, add "\n" to the output of set method to make it more readable.
Signed-off-by: Yang Shi <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Pull asm-generic syscall fix from Arnd Bergmann:
"My last pull request for asm-generic had just one patch that added two
new system calls to asm/unistd.h, but unfortunately it turned out to
be wrong, pointing arch/tile compat mode at the native handlers rather
than the compat ones.
This was spotted by Yury Norov, who is working on ILP32 mode for
arch/arm64, which would have the same problem when merged. This fixes
the table to use the correct compat syscalls, like the other 64-bit
architectures do.
I'll try to find the time to come up with a solution that prevents
this problem from happening again, by allowing all future system calls
to just get added in a single file for use by all architectures"
* tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: use compat version for preadv2 and pwritev2
Jonathan writes:
Fourth set of IIO fixes for the 4.6 cycle.
This last minute set is concerned with a regression in the mpu6050 driver.
The regression causes a null pointer dereference on any ACPI device
that has one of these present such as the ASUS T100TA Baytrail/T.
The issue was known but thought (i.e. missunderstood by me)
to only be a possible with no reports, so was routed via the normal merge
window. Turns out this was wrong (thanks to Alan for reporting the crash).
The pull is just for the null dereference fix and a followup fix
that also stops the reported name of the device being NULL.
* mpu6050
- Fix a 'possible' NULL dereference introduced as part of splitting the
driver to allow both i2c and spi to be supported. The issue affects ACPI
systems with this device.
- Fix a follow up issue where the name and chip id both get set to null if
the device driver instance is instantiated from ACPI tables.
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple last-minute fixes for ARM SoCs. Most of them are
for the OMAP platforms, the rest are all for different platforms.
OMAP:
All dts fixes, mostly affecting voltages and pinctrl for various
device drivers:
- Regulator minimum voltage fixes for omap5
- ISP syscon register offset fix for omap3
- Fix regulator initial modes for n900
- Fix omap5 pinctrl wkup instance size
Allwinner:
Remove incorrect constraints from a dcdc1 regulator
Alltera SoCFPGA:
Fix compilation in thumb2 mode
Samsung exynos:
Fix a potential oops in the pm-domain error handling
Davinci:
Avoid a link error if NVMEM is disabled
Renesas:
Do not mark an external uart clock as disabled, to allow probing
the uarts"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: davinci: only use NVMEM when available
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: dts: omap5: fix range of permitted wakeup pinmux registers
ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
ARM: dts: omap3: Fix ISP syscon register offset
ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges
ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
arm64: dts: r8a7795: Don't disable referenced optional scif clock
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
Update my email and web addresses in the kernel maintainers file.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Commit 947e9762a8 ("writeback: update wb_over_bg_thresh() to use
wb_domain aware operations") unintentionally changed this function's
meaning from "are there more dirty pages than the background writeback
threshold" to "are there more dirty pages than the writeback threshold".
The background writeback threshold is typically half of the writeback
threshold, so this had the effect of raising the number of dirty pages
required to cause a writeback worker to perform background writeout.
This can cause a very severe performance regression when a BDI uses
BDI_CAP_STRICTLIMIT because balance_dirty_pages() and the writeback worker
can now disagree on whether writeback should be initiated.
For example, in a system having 1GB of RAM, a single spinning disk, and a
"pass-through" FUSE filesystem mounted over the disk, application code
mmapped a 128MB file on the disk and was randomly dirtying pages in that
mapping.
Because FUSE uses strictlimit and has a default max_ratio of only 1%, in
balance_dirty_pages, thresh is ~200, bg_thresh is ~100, and the
dirty_freerun_ceiling is the average of those, ~150. So, it pauses the
dirtying processes when we have 151 dirty pages and wakes up a background
writeback worker. But the worker tests the wrong threshold (200 instead of
100), so it does not initiate writeback and just returns.
Thus, balance_dirty_pages keeps looping, sleeping and then waking up the
worker who will do nothing. It remains stuck in this state until the few
dirty pages that we have finally expire and we write them back for that
reason. Then the whole process repeats, resulting in near-zero throughput
through the FUSE BDI.
The fix is to call the parameterized variant of wb_calc_thresh, so that the
worker will do writeback if the bg_thresh is exceeded which was the
behavior before the referenced commit.
Fixes: 947e9762a8 ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations")
Signed-off-by: Howard Cochran <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Cc: <[email protected]> # v4.2+
Tested-by Sedat Dilek <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Recursive undefined instrcution falut is seen with R-class taking an
exception. The reson for that is __show_regs() tries to get domain
information, but domains is not available on !MMU cores, like R/M
class.
Fix it by puting {set,get}_domain functions under CONFIG_CPU_CP15_MMU
guard and providing stubs for the case where domains is not supported.
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Russell King <[email protected]>
Commit 19accfd3 (ARM: move vector stubs) moved the vector stubs in an
additional page above the base vector one. This change wasn't taken into
account by the nommu memreserve.
This patch ensures that the kernel won't overwrite any vector stub on
nommu.
[changed the MPU side too]
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Russell King <[email protected]>
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) broke the support for
MPU on ARMv7-R. This patch adapts the code inside CONFIG_ARM_MPU to use
memblocks appropriately.
MPU initialisation only uses the first memory region, and removes all
subsequent ones. Because looping over all regions that need removal is
inefficient, and memblock_remove already handles memory ranges, we can
flatten the 'for_each_memblock' part.
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Russell King <[email protected]>
iSER currently has a couple places that set max_sectors in either the host
template or SCSI host, and all of them get it wrong.
This patch instead uses a single assignment that (hopefully) gets it right:
the max_sectors value must be derived from the number of segments in the
FR or FMR structure, but actually be one lower than the page size multiplied
by the number of sectors, as it has to handle the case of non-aligned I/O.
Without this I get trivial to reproduce hangs when running xfstests
(on XFS) over iSER to Linux targets.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Acked-by: Sagi Grimberg <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Pull userns fix from Eric Biederman:
"This contains just a single fix for a nasty oops"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
propogate_mnt: Handle the first propogated copy being a slave
Rafael J. Wysocki