Samsung fixes for 3.15 from Kukjin Kim:
- Remove g2d_pd and mau_pd nodes on exynos5420.
Since the power domains are linked to the CMU blocks,
kernel panic happens during access clocks when the
power domains are disabled. Now this is a best solution.
- Enable HS-I2C on exynos5 by default
MMC partition cannot be mounted for RFS without the
enabling HS-I2C because regulators for MMC power are
connected to HS-I2C bus.
- Disable MDMA1 node on exynos5420
When MDMA1 runs in secure mode it makes kernel fault,
so need to disalbe it on exynos5420 by default instead
of each board.
- Fix the secondary CPU boot for exynos4212
* tag 'samsung-fixes' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Remove g2d_pd node for exynos5420
ARM: dts: Remove mau_pd node for exynos5420
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
ARM: dts: disable MDMA1 node for exynos5420
ARM: EXYNOS: fix the secondary CPU boot of exynos4212
Signed-off-by: Olof Johansson <[email protected]>
radeon fixes, VCE one is big but does fix a userspace crash.
* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon/pm: don't allow debugfs/sysfs access when PX card is off (v2)
drm/radeon: avoid segfault on device open when accel is not working.
drm/radeon: fix typo in finding PLL params
drm/radeon: fix register typo on si
drm/radeon: fix buffer placement under memory pressure v2
drm/radeon: fix page directory update size estimation
drm/radeon: handle non-VGA class pci devices with ATRM
drm/radeon: fix DCE83 check for mullins
drm/radeon: check VCE relocation buffer range v3
drm/radeon: also try GART for CPU accessed buffers
fixes nasty panel bleeding bug.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setup
drm/nvd9/therm: handle another kind of PWM fan
When GRE support was added in linux-3.14, CHECKSUM_COMPLETE handling
broke on GRE+IPv6 because we did not update/use the appropriate csum :
GRO layer is supposed to use/update NAPI_GRO_CB(skb)->csum instead of
skb->csum
Tested using a GRE tunnel and IPv6 traffic. GRO aggregation now happens
at the first level (ethernet device) instead of being done in gre
tunnel. Native IPv6+TCP is still properly aggregated.
Fixes: bf5a755f5e ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jerry Chu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The count which is used to get_unmap_data maybe not the same as the
count computed in dmaengine_unmap which causes to free data in a
wrong pool.
This patch fixes this issue by keeping the map count with unmap_data
structure and use this count to get the pool.
Cc: <[email protected]>
Signed-off-by: Xuelin Shi <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
We need to use writel() instead of writel_relaxed() when starting
a channel, to ensure all the descriptors have been flushed before
the activation.
While at it, remove the unneeded read-modify-write and make the
code simpler.
Cc: <[email protected]>
Signed-off-by: Lior Amsalem <[email protected]>
Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Pull two powerpc fixes from Ben Herrenschmidt:
"Here are a couple of fixes for 3.15. One from Anton fixes a nasty
regression I introduced when trying to fix a loss of irq_work whose
consequences is that we can completely lose timer interrupts on a
CPU... not pretty.
The other one is a change to our PCIe reset hook to use a firmware
call instead of direct config space accesses to trigger a fundamental
reset on the root port. This is necessary so that the FW gets a
chance to disable the link down error monitoring, which would
otherwise trip and cause subsequent fatal EEH error"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: irq work racing with timer interrupt can result in timer interrupt hang
powerpc/powernv: Reset root port in firmware
Pull two btrfs fixes from Chris Mason:
"This has two fixes that we've been testing for 3.16, but since both
are safe and fix real bugs, it makes sense to send for 3.15 instead"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: send, fix incorrect ref access when using extrefs
Btrfs: fix EIO on reading file after ioctl clone works on it
Pull two ceph fixes from Sage Weil:
"The first patch fixes a problem when we have a page count of 0 for
sendpage which is triggered by zfs. The second fixes a bug in CRUSH
that was resolved in the userland code a while back but fell through
the cracks on the kernel side"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
crush: decode and initialize chooseleaf_vary_r
libceph: fix corruption when using page_count 0 page in rbd
Pull xfs fixes from Dave Chinner:
"Code inspection of the XFS error number sign translations found a
bunch of issues, including returning incorrectly signed errors for
some data integrity operations.
These leak to userspace and result in applications not getting the
errors correctly reported. Hence they need fixing sooner rather than
later.
A couple of the bugs are in data integrity operations, a couple more
are in the new COLLAPSE_RANGE code. One of these came in through a
recent ext4 merge and so I had to update the base tree to 3.15-rc5
before fixing the issues"
* tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs:
xfs: list_lru_init returns a negative error
xfs: negate xfs_icsb_init_counters error value
xfs: negate mount workqueue init error value
xfs: fix wrong err sign on xfs_set_acl()
xfs: fix wrong errno from xfs_initxattrs
xfs: correct error sign on COLLAPSE_RANGE errors
xfs: xfs_commit_metadata returns wrong errno
xfs: fix incorrect error sign in xfs_file_aio_read
xfs: xfs_dir_fsync() returns positive errno
Pull renameat2 arch support from Miklos Szeredi:
"I've collected architecture patches for the renameat2 syscall that
maintainers acked and/or asked me to queue.
This adds architecture support for the renameat2 syscall to m68k,
parisc, ia64 and through asm-generic to arc, arm64, c6x, hexagon,
metag, openrisc, score, tile, unicore32"
* 'renameat2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
scripts/checksyscalls.sh: Make renameat optional
asm-generic: Add renameat2 syscall
ia64: add renameat2 syscall
parisc: add renameat2 syscall
m68k: add renameat2 syscall
Pull iommu fixes from Joerg Roedel:
"Three fixes for the AMD IOMMU driver:
- fix a locking issue around get_user_pages()
- fix two issues with device aliasing and exclusion range handling"
* tag 'iommu-fixes-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: fix enabling exclusion range for an exact device
iommu/amd: Take mmap_sem when calling get_user_pages
iommu/amd: Fix interrupt remapping for aliased devices
Pull iscsi_ibft fix from Konrad Rzeszutek Wilk:
"Fix iBFT regression on Broadcom NICs introduced in 3.2"
* tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Fix finding Broadcom specific ibft sign
Pull SH driver fix from Simon Horman:
"Compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
This resolves a regression introduced in v3.14 by commit bf98c1eac1
("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")"
* tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
The current code assumes a one-to-one lockowner<->lock stateid
correspondance.
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.
We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.
Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Fix the cache manager RPC service handlers. The afs_send_empty_reply() and
afs_send_simple_reply() functions:
(a) Kill the call and free up the buffers associated with it if they fail.
(b) Return with call intact if it they succeed.
However, none of the callers actually check the result or clean up if
successful - and may use the now non-existent data if it fails.
This was detected by Dan Carpenter using a static checker:
The patch 08e0e7c82e: "[AF_RXRPC]: Make the in-kernel AFS
filesystem use AF_RXRPC." from Apr 26, 2007, leads to the following
static checker warning:
"fs/afs/cmservice.c:155 SRXAFSCB_CallBack()
warn: 'call' was already freed."
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: David Howells <[email protected]>
This patch automatically adjusts the path of MMAP records
associated with Android system libraries.
The Android system is organized with system libraries found in
/system/lib and user libraries in /data/app-lib. On the host system
(not running Android), system libraries can be found in the downloaded
NDK directory under ${NDK_ROOT}/platforms/${APP_PLATFORM}/arch-${ARCH}/usr/lib
and the user libraries are installed under libs/${APP_ABI} within
the apk build directory. This patch makes running the reporting
tools possible on the host system using the libraries from the NDK.
Signed-off-by: Michael Lentine <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ fixed 'space required before the open parenthesis' checkpatch.pl errors ]
Signed-off-by: Jiri Olsa <[email protected]>
asid_cache must be unsigned long otherwise on 64 bit systems it will
become 0 if the value in get_new_mmu_context() reaches 0xffffffff and
in the end the assumption of ASID_FIRST_VERSION is not true anymore
thus leads to more dangerous things.
Initial patch by Yong Zhang <[email protected]>
Signed-off-by: Ralf Baechle <[email protected]>
Reported-by: libin <[email protected]>
Pull media fixes from Mauro Carvalho Chehab:
"Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670,
davinci, gspca, s5p-fimc and s5c73m3).
There is also a compat32 fix and one infoleak fixup at the media
controller"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode
[media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space
[media] media-device: fix infoleak in ioctl media_enum_entities()
[media] fc2580: fix tuning failure on 32-bit arch
[media] Prefer gspca_sonixb over sn9c102 for all devices
[media] media: davinci: vpfe: make sure all the buffers unmapped and released
[media] staging: media: davinci: vpfe: make sure all the buffers are released
[media] media: davinci: vpbe_display: fix releasing of active buffers
[media] media: davinci: vpif_display: fix releasing of active buffers
[media] media: davinci: vpif_capture: fix releasing of active buffers
[media] s5p-fimc: Fix YUV422P depth
[media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function
[media] rtl28xxu: silence error log about disabled rtl2832_sdr module
[media] rtl28xxu: do not hard depend on staging SDR module
Pull staging driver fixes from Greg KH:
"Here are five staging driver fixes for 3.15-rc6 that resolve some
reported issues. They are for the imx and rtl8723au drivers"
* tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
staging: rtl8723au: Use correct pipe type for USB interrupts
imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'
imx-drm: imx-drm-core: skip components whose parent device is disabled
imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id
Pull driver core fixes from Greg KH:
"Here are two driver core (well, sysfs) fixes for 3.15-rc6 that resolve
some reported issues and a regression from 3.13"
* tag 'driver-core-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: make sure read buffer is zeroed
kernfs, sysfs, cgroup: restrict extra perm check on open to sysfs
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for an SHPCHP hotplug regression, a "wait for pending
transaction" problem (used in device reset paths), and an email
address update.
PCI device hotplug:
- Fix SHPCHP bus speed mismatch issue (Marcel Apfelbaum)
Miscellaneous:
- Fix pci_wait_for_pending_transaction() (Gavin Shan)
- Update email address (Ben Hutchings)"
* tag 'pci-v3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Wrong register used to check pending traffic
PCI: shpchp: Check bridge's secondary (not primary) bus speed
PCI: Update my email address
Pull /dev/random fix from Ted Ts'o:
"This fixes a BUG_ON-causing regression that was introduced during the
last merge window"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: fix BUG_ON caused by accounting simplification
Pull clock framework fixes from Mike Turquette:
"Clock framework and driver fixes, all of which fix user-visible
regressions.
As usual most fixes are for platform-specific clock drivers, but there
are also two fixes to the clk core after recent changes to the way
that clock unregistration is handled"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: tegra: Fix wrong value written to PLLE_AUX
clk: shmobile: clk-mstp: change to using clock-indices
clk: Fix slab corruption in clk_unregister()
clk: Fix double free due to devm_clk_register()
clk: socfpga: fix clock driver for 3.15
clk: divider: Fix best div calculation for power-of-two and table dividers
clk: bcm281xx: don't use unnamed structs or unions
Pull spi fixes from Mark Brown:
"A few core fixes around outlying cases here, nothing that should
affect most users but useful fixes. The diffstat is rather larger
than one might hope due some simple code motion in the fix for
!CONFIG_DMA, the actual meaningful change is much smaller.
- Fix handling of unsupported dual and quad mode support on slave
registration so that drivers that can degrade gracefully do so,
preventing regressions for drivers this is added.
- Fix build in !CONFIG_DMA cases following addition of generic DMA
mapping support.
- Fix error handling for queue creation which due to wider kernel
changes can be triggered more easily.
- A couple of driver specific fixes"
* tag 'spi-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi/pxa2xx: Prevent DMA from transferring too many bytes
spi: core: Don't destroy master queue if we fail to create it
spi: qup: Fix return value checking for pm_runtime_get_sync()
spi: core: Protect DMA code by #ifdef CONFIG_HAS_DMA
spi: core: Ignore unsupported Dual/Quad Transfer Mode bits
Pull GPIO fixes from Linus Walleij:
- fix a null pointer bug in the ICH6 chipset driver
- fix device tree registration for the mcp23s08 driver
* tag 'gpio-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mcp23s08: Bug fix of SPI device tree registration.
gpio: ich: set regs and reglen for i3100 and ich6 chipset
Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension. Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
The --fields option is to allow user setup output field in any order.
It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
More more information, please see previous patch "perf report:
Add -F option to specify output fields"
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI. It has a check for
filtering out entries that have very small overhead (under min_pcnt).
However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization. But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly. However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users. So add ->sort() member to do it.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
The -F/--fields option is to allow user setup output field in any
order. It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
The output fields also affect sort order unless you give -s/--sort
option. And any keys specified on -s option, will also be added to
the output field list automatically.
$ perf report -F sym,sample,overhead
...
# Symbol Samples Overhead
# .......................... ............ ........
#
[.] __cxa_atexit 2 2.50%
[.] __libc_csu_init 4 5.00%
[.] __new_exitfn 3 3.75%
[.] _dl_check_map_versions 1 1.25%
[.] _dl_name_match_p 4 5.00%
[.] _dl_setup_hash 1 1.25%
[.] _dl_sysdep_start 1 1.25%
[.] _init 5 6.25%
[.] _setjmp 6 7.50%
[.] a 8 10.00%
[.] b 8 10.00%
[.] brk 1 1.25%
[.] c 8 10.00%
Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
So that it can be set properly prior to set up output fields. That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code. Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.
So move the logic to the hist_browser__show_entry().
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.
The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.
To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list. And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
Olof Johansson