This fixes the regression caused by the commit 6fee48cd33
("dma-mapping: arm: use generic pci_set_dma_mask and
pci_set_consistent_dma_mask").
ARM needs to clip the dma coherent mask for dmabounce devices. This
restores the old trick.
Note that strictly speaking, the DMA API doesn't allow architectures to do
such but I'm not sure it's worth adding the new API to set the dma mask
that allows architectures to clip it.
Reported-by: Krzysztof Halasa <[email protected]>
Signed-off-by: FUJITA Tomonori <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
dma_get_cache_alignment returns the minimum DMA alignment. Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we
can unify dma_get_cache_alignment implementations.
Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment. So
fully-coherent architectures should return 1. This patch also fixes this
issue.
Signed-off-by: FUJITA Tomonori <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Since 2.6.5, it had been commented, 'for backwards compatibility,
removed in 2.7.x'. Since 2.6.31, it have been marked as __deprecated.
I think that we can remove the API safely now.
Signed-off-by: FUJITA Tomonori <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
sync_single_range_for_cpu and sync_single_range_for_device hooks are
unnecessary because sync_single_for_cpu and sync_single_for_device can
be used instead.
Signed-off-by: FUJITA Tomonori <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask. This is
necessary to move to the generic device model DMA API from the PCI bus
specific API in the long term.
dma_set_coherent_mask works in the exact same way that
pci_set_consistent_dma_mask does. So this patch also changes
pci_set_consistent_dma_mask to call dma_set_coherent_mask.
Signed-off-by: FUJITA Tomonori <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Russell King <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Kay Sievers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Adds the following macros:
DECLARE_DMA_UNMAP_ADDR(ADDR_NAME)
DECLARE_DMA_UNMAP_LEN(LEN_NAME)
dma_unmap_addr(PTR, ADDR_NAME)
dma_unmap_addr_set(PTR, ADDR_NAME, VAL)
dma_unmap_len(PTR, LEN_NAME)
dma_unmap_len_set(PTR, LEN_NAME, VAL)
The API corresponds to the pci_unmap state API. We'll move to this new
generic API from the PCI specific API in the long term. As
include/asm-generic/pci-dma-compat.h does, the pci_unmap API simply calls
the new generic API for some time.
Signed-off-by: FUJITA Tomonori <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
is_buffer_dma_capable() was replaced with dma_capable().
is_buffer_dma_capable() tells if a buffer is dma-capable or
not. However, it doesn't take a pointer to struct device so it doesn't
work for POWERPC.
Signed-off-by: FUJITA Tomonori <[email protected]>
Acked-by: Becky Bruce <[email protected]>
dma_sync_single() and dma_sync_sg() have been described as "Backwards
compat, remove in 2.7.x" for a long time (since 2.6.5).
This marks dma_sync_single() and dma_sync_sg() as deprecated so the users
get notified before removing them.
Signed-off-by: FUJITA Tomonori <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: "David S. Miller" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Several IOMMUs do the same thing to get the dma_mask of a device. This
adds a helper function to do the same thing to sweep them.
Signed-off-by: FUJITA Tomonori <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
is_buffer_dma_capable helper function is to see if a memory region is
DMA-capable or not. The arugments are the dma_mask (or
coherent_dma_mask) of a device and the address and size of a memory
region.
Signed-off-by: FUJITA Tomonori <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Introduce new interfaces, dma_*map*_attrs(), for passing architecture-specific
attributes when memory is mapped and unmapped for DMA. Give the interfaces
default implementations which ignore attributes. Also introduce the
dma_{set|get}_attr() interfaces for setting and retrieving individual
attributes. Define one attribute, DMA_ATTR_WRITE_BARRIER, in anticipation of
its use by ia64/sn. Select whether architectures implement arch-specific
versions of the dma_*map*_attrs() interfaces via HAVE_DMA_ATTRS in Kconfig.
[[email protected]: dma_{set,get}_attr() have to be static inline]
Signed-off-by: Arthur Kepner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: Jes Sorensen <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Roland Dreier <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: David Miller <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Grant Grundler <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Mark Nelson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This adds new accessors for segment_boundary_mask in device_dma_parameters
structure in the same way I did for max_segment_size. So we can easily change
where to place struct device_dma_parameters in the future.
dma_get_segment boundary returns 0xffffffff if dma_parms in struct device
isn't set up properly. 0xffffffff is the default value used in the block
layer and the scsi mid layer.
Signed-off-by: FUJITA Tomonori <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Jeff Garzik <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
IOMMUs merges scatter/gather segments without considering a low level
driver's restrictions. The problem is that IOMMUs can't access to the
limitations because they are in request_queue.
This patchset introduces a new structure, device_dma_parameters,
including dma information. A pointer to device_dma_parameters is added
to struct device. The bus specific structures (like pci_dev) includes
device_dma_parameters. Low level drivers can use dma_set_max_seg_size
to tell IOMMUs about the restrictions.
We can move more dma stuff in struct device (like dma_mask) to struct
device_dma_parameters later (needs some cleanups before that).
This includes patches for all the IOMMUs that could merge sg (x86_64,
ppc, IA64, alpha, sparc64, and parisc) though only the ppc patch was
tested. The patches for other IOMMUs are only compile tested.
This patch:
Add a new structure, device_dma_parameters, including dma information. A
pointer to device_dma_parameters is added to struct device.
- there are only max_segment_size and segment_boundary_mask there but we'll
move more dma stuff in struct device (like dma_mask) to struct
device_dma_parameters later. segment_boundary_mask is not supported yet.
- new accessors for the dma parameters are added. So we can easily change
where to place struct device_dma_parameters in the future.
- dma_get_max_seg_size returns 64K if dma_parms in struct device isn't set
up properly. 64K is the default max_segment_size in the block layer.
Signed-off-by: FUJITA Tomonori <[email protected]>
Acked-by: Jeff Garzik <[email protected]>
Cc: James Bottomley <[email protected]>
Acked-by: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Having the macro to prevent multiple inclusion of
include/linux/dma-mapping.h contain the prefix "_ASM" is just begging
for possible confusion some day.
Signed-off-by: Robert P. J. Day <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
Remove redundant DMA_..BIT_MASK definitions across two drivers. The
computation of the majority of the bitmasks is done by the compiler. The
initial split of the patch touching each a different file got removed due
to possible git bisect breakage.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Muli Ben-Yehuda <[email protected]>
Cc: Jeff Garzik <[email protected]>
Cc: James Bottomley <[email protected]>
Reviewed-by: Satyam Sharma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Implement device resource management, in short, devres. A device
driver can allocate arbirary size of devres data which is associated
with a release function. On driver detach, release function is
invoked on the devres data, then, devres data is freed.
devreses are typed by associated release functions. Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function. Both usages are
supported.
devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).
This patch adds devres core including documentation and the following
managed interfaces.
* alloc/free : devm_kzalloc(), devm_kzfree()
* IO region : devm_request_region(), devm_release_region()
* IRQ : devm_request_irq(), devm_free_irq()
* DMA : dmam_alloc_coherent(), dmam_free_coherent(),
dmam_declare_coherent_memory(), dmam_pool_create(),
dmam_pool_destroy()
* PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
pcim_iomap(), pcim_iounmap()
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
These are the last conversions of pci_set_dma_mask(),
pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK
constants from linux/dma-mapping.h
Signed-off-by: Tobias Klauser <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask()
and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from
linux/dma-mapping.h.
Signed-off-by: Matthias Gehre <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This patch introduces the DMA_28BIT_MASK constant in dma-mapping.h
ALSA drivers using this mask are changed to use the new constant.
Signed-off-by: Tobias Klauser <[email protected]>
Acked-by: Takashi Iwai <[email protected]>
Acked-by: Jaroslav Kysela <[email protected]>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
FUJITA Tomonori