This patch:
1. Refactor the routines used to compile and run an embedder
entrypoint. In JS land special handling for SEA is done
directly in main/embedding.js instead of clobbering the CJS
loader. Add warnings to remind users that currently the
require() in SEA bundled scripts only supports loading builtins.
2. Don't use the bundled SEA code cache when compiling CJS
loaded from disk, since in that case we are certainly not
compiling the code bundled into the SEA. Use a is_sea_main
flag in CompileFunctionForCJSLoader() (which replaces an unused
argument) to pass this into the C++ land - the code cache is
still read directly from C++ to avoid the overhead of
ArrayBuffer creation.
3. Move SEA loading code into
MaybeLoadSingleExecutableApplication() which calls
LoadEnvironment() with its own StartExecutionCallback().
This avoids more hidden switches in StartExecution() and
make them explicit. Also add some TODOs about how to support
ESM in embedded applications.
4. Add more comments
PR-URL: https://github.com/nodejs/node/pull/53573
Reviewed-By: Geoffrey Booth <webadmin@geoffreybooth.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Unifies the CJS and ESM source map cache map with SourceMapCacheMap
and allows the CJS cache entries to be queried more efficiently with
a source url without iteration on an IterableWeakMap.
Add a test to verify that the CJS source map cache entry can be
reclaimed.
PR-URL: https://github.com/nodejs/node/pull/51711
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
This patch adds `require()` support for synchronous ESM graphs under
the flag `--experimental-require-module`
This is based on the the following design aspect of ESM:
- The resolution can be synchronous (up to the host)
- The evaluation of a synchronous graph (without top-level await) is
also synchronous, and, by the time the module graph is instantiated
(before evaluation starts), this is is already known.
If `--experimental-require-module` is enabled, and the ECMAScript
module being loaded by `require()` meets the following requirements:
- Explicitly marked as an ES module with a `"type": "module"` field in
the closest package.json or a `.mjs` extension.
- Fully synchronous (contains no top-level `await`).
`require()` will load the requested module as an ES Module, and return
the module name space object. In this case it is similar to dynamic
`import()` but is run synchronously and returns the name space object
directly.
```mjs
// point.mjs
export function distance(a, b) {
return (b.x - a.x) ** 2 + (b.y - a.y) ** 2;
}
class Point {
constructor(x, y) { this.x = x; this.y = y; }
}
export default Point;
```
```cjs
const required = require('./point.mjs');
// [Module: null prototype] {
// default: [class Point],
// distance: [Function: distance]
// }
console.log(required);
(async () => {
const imported = await import('./point.mjs');
console.log(imported === required); // true
})();
```
If the module being `require()`'d contains top-level `await`, or the
module graph it `import`s contains top-level `await`,
[`ERR_REQUIRE_ASYNC_MODULE`][] will be thrown. In this case, users
should load the asynchronous module using `import()`.
If `--experimental-print-required-tla` is enabled, instead of throwing
`ERR_REQUIRE_ASYNC_MODULE` before evaluation, Node.js will evaluate the
module, try to locate the top-level awaits, and print their location to
help users fix them.
PR-URL: https://github.com/nodejs/node/pull/51977
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Geoffrey Booth <webadmin@geoffreybooth.com>
Add a "table" parameter to getCoverageReport.
Keep the tap coverage output intact.
Change the output by adding padding and truncating the tables' cells.
Add separation lines for table head/body/foot.
Group uncovered lines as ranges.
Add yellow color for coverage between 50 and 90.
Refs: https://github.com/nodejs/node/pull/46674
PR-URL: https://github.com/nodejs/node/pull/47791
Reviewed-By: Moshe Atlow <moshe@atlow.co.il>
Since SEA is very similar in principle to embedding functionality,
it makes sense to share code paths where possible. This commit does
so and addresses a `TODO` while doing so.
It also adds a utility to directly run CJS code to the embedder
startup callback, which comes in handy for this purpose.
Finally, this commit is breaking because it aligns the behavior
of `require()`ing internal modules; previously, embedders could
use the `require` function that they received to do so.
(If this is not considered breaking because accessing internals
is not covered by the API, then this would need ABI compatibility
patches for becoming fully non-breaking.)
PR-URL: https://github.com/nodejs/node/pull/46825
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Minwoo Jung <nodecorelab@gmail.com>
This is mainly a performance improvement for a lot of simple cases.
Diverging elements are detected earlier and equal entries are
partially also detected faster.
A small correctness patch is also included where recursions now
stop as soon as either side has a circular structure. Before, both
sides had to have a circular structure at the specific comparison
which could have caused more checks that likely fail at a later
point.
Signed-off-by: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/46593
Reviewed-By: Yagiz Nizipli <yagiz@nizipli.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This commit stops the test runner CLI from parsing child
process stderr as TAP. Per the TAP spec, TAP can only come from
stdout. To avoid losing stderr data, those logs are injected
into the parser as unknown tokens so that they are output as
comments.
PR-URL: https://github.com/nodejs/node/pull/45618
Reviewed-By: Moshe Atlow <moshe@atlow.co.il>
The term "native module" dates back to some of the oldest code
in the code base. Within the context of Node.js core it usually
refers to modules that are native to Node.js (e.g. fs, http),
but it can cause confusion for people who don't work on this
part of the code base, as "native module" can also refer to
native addons - which is even the case in some of the API
docs and error messages.
This patch tries to make the usage of these terms more consistent.
Now within the context of Node.js core:
- JavaScript scripts that are built-in to Node.js are now referred
to as "built-in(s)". If they are available as modules,
they can also be referred to as "built-in module(s)".
- Dynamically-linked shared objects that are loaded into
the Node.js processes are referred to as "addons".
We will try to avoid using the term "native modules" because it could
be ambiguous.
Changes in this patch:
File names:
- node_native_module.h -> node_builtins.h,
- node_native_module.cc -> node_builtins.cc
C++ binding names:
- `native_module` -> `builtins`
`node::Environment`:
- `native_modules_without_cache` -> `builtins_without_cache`
- `native_modules_with_cache` -> `builtins_with_cache`
- `native_modules_in_snapshot` -> `builtins_in_cache`
- `native_module_require` -> `builtin_module_require`
`node::EnvSerializeInfo`:
- `native_modules` -> `builtins
`node::native_module::NativeModuleLoader`:
- `native_module` namespace -> `builtins` namespace
- `NativeModuleLoader` -> `BuiltinLoader`
- `NativeModuleRecordMap` -> `BuiltinSourceMap`
- `NativeModuleCacheMap` -> `BuiltinCodeCacheMap`
- `ModuleIds` -> `BuiltinIds`
- `ModuleCategories` -> `BuiltinCategories`
- `LoadBuiltinModuleSource` -> `LoadBuiltinSource`
`loader.js`:
- `NativeModule` -> `BuiltinModule` (the `NativeModule` name used in
`process.moduleLoadList` is kept for compatibility)
And other clarifications in the documentation and comments.
PR-URL: https://github.com/nodejs/node/pull/44135
Fixes: https://github.com/nodejs/node/issues/44036
Reviewed-By: Jacob Smith <jacob@frende.me>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michael Dawson <midawson@redhat.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Joyee Cheung