Reorder the init parameters from bootconfig and kernel cmdline
so that the kernel cmdline always be the last part of the
parameters as below.
" -- "[bootconfig init params][cmdline init params]
This change will help us to prevent that bootconfig init params
overwrite the init params which user gives in the command line.
Link: https://lkml.kernel.org/r/163077085675.222577.5665176468023636160.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
There are two bugs in this code. First, if the kzalloc() fails it leads
to a NULL dereference of "ep" on the next line. Second, if the
alloc_event_probe() function returns an error then it leads to an
error pointer dereference in the caller.
Link: https://lkml.kernel.org/r/20210824115150.GI31143@kili
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
migrate_disable() forbids task migration to another CPU. It is available
since v5.11 and has already users such as highmem or BPF. It is useful
to observe this task state in tracing which already has other states
like the preemption counter.
Instead of adding the migrate disable counter as a new entry to struct
trace_entry, which would extend the whole struct by four bytes, it is
squashed into the preempt-disable counter. The lower four bits represent
the preemption counter, the upper four bits represent the migrate
disable counter. Both counter shouldn't exceed 15 but if they do, there
is a safety net which caps the value at 15.
Add the migrate-disable counter to the trace entry so it shows up in the
trace. Due to the users mentioned above, it is already possible to
observe it:
| bash-1108 [000] ...21 73.950578: rss_stat: mm_id=2213312838 curr=0 type=MM_ANONPAGES size=8192B
| bash-1108 [000] d..31 73.951222: irq_disable: caller=flush_tlb_mm_range+0x115/0x130 parent=ptep_clear_flush+0x42/0x50
| bash-1108 [000] d..31 73.951222: tlb_flush: pages:1 reason:local mm shootdown (3)
The last value is the migrate-disable counter.
Things that popped up:
- trace_print_lat_context() does not print the migrate counter. Not sure
if it should. It is used in "verbose" mode and uses 8 digits and I'm
not sure ther is something processing the value.
- trace_define_common_fields() now defines a different variable. This
probably breaks things. No ide what to do in order to preserve the old
behaviour. Since this is used as a filter it should be split somehow
to be able to match both nibbles here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
[bigeasy: patch description.]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
[ SDR: Removed change to common_preempt_count field name ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The addition of the buckets conversion for the histogram code, updated the
documentation table of available conversions, but did not update the format
to accommodate the extra size needed to cover the description.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: Stephen Rothwell <[email protected]>
Tested-by: Stephen Rothwell <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The selftest for ftrace checks some features by checking if the README has
text that states the feature is supported by that kernel. Unfortunately,
this check gives false positives because it many not be checked if there's
spaces in the string to check. This is due to the compare between the
required variable with the ":README" string stripped, because neither has
quotes around them.
Link: https://lkml.kernel.org/r/[email protected]
Cc: "Tzvetomir Stoyanov" <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 1b8eec510b ("selftests/ftrace: Support ":README" suffix for requires")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
A new dynamic event is introduced: event probe. The event is attached
to an existing tracepoint and uses its fields as arguments. The user
can specify custom format string of the new event, select what tracepoint
arguments will be printed and how to print them.
An event probe is created by writing configuration string in
'dynamic_events' ftrace file:
e[:[SNAME/]ENAME] SYSTEM/EVENT [FETCHARGS] - Set an event probe
-:SNAME/ENAME - Delete an event probe
Where:
SNAME - System name, if omitted 'eprobes' is used.
ENAME - Name of the new event in SNAME, if omitted the SYSTEM_EVENT is used.
SYSTEM - Name of the system, where the tracepoint is defined, mandatory.
EVENT - Name of the tracepoint event in SYSTEM, mandatory.
FETCHARGS - Arguments:
<name>=$<field>[:TYPE] - Fetch given filed of the tracepoint and print
it as given TYPE with given name. Supported
types are:
(u8/u16/u32/u64/s8/s16/s32/s64), basic type
(x8/x16/x32/x64), hexadecimal types
"string", "ustring" and bitfield.
Example, attach an event probe on openat system call and print name of the
file that will be opened:
echo "e:esys/eopen syscalls/sys_enter_openat file=\$filename:string" >> dynamic_events
A new dynamic event is created in events/esys/eopen/ directory. It
can be deleted with:
echo "-:esys/eopen" >> dynamic_events
Filters, triggers and histograms can be attached to the new event, it can
be matched in synthetic events. There is one limitation - an event probe
can not be attached to kprobe, uprobe or another event probe.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Co-developed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Since kprobe_events and uprobe_events only check whether the
other same-type probe event has the same name or not, if the
user gives the same name of the existing tracepoint event (or
the other type of probe events), it silently fails to create
the tracefs entry (but registered.) as below.
/sys/kernel/tracing # ls events/task/task_rename
enable filter format hist id trigger
/sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events
[ 113.048508] Could not create tracefs 'task_rename' directory
/sys/kernel/tracing # cat kprobe_events
p:task/task_rename vfs_read
To fix this issue, check whether the existing events have the
same name or not in trace_probe_register_event_call(). If exists,
it rejects to register the new event.
Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
In preparation to allow event probes to use the process_fetch_insn()
callback in trace_probe_tmpl.h, change the data passed to it from a
pointer to pt_regs, as the event probe will not be using regs, and make it
a void pointer instead.
Update the process_fetch_insn() callers for kprobe and uprobe events to
have the regs defined in the function and just typecast the void pointer
parameter.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Instead of a boolean "is_return" have traceprobe_set_print_fmt() take a
type (currently just PROBE_PRINT_NORMAL and PROBE_PRINT_RETURN). This will
simplify adding different types. For example, the development of the
event_probe, will need its own type as it prints an event, and not an IP.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Remove SIZEOF_TRACE_KPROBE() and SIZEOF_TRACE_UPROBE() and use
struct_size() as that's what it is made for. No need to have custom
macros. Especially since struct_size() has some extra memory checks for
correctness.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Kprobe and uprobe events can add a "system" to the events that are created
via the kprobe_events and uprobe_events files respectively. If they do not
include a "system" in the name, then the default "kprobes" or "uprobes" is
used. The current notation to specify a system for one of these probe
events is to add a '/' delimiter in the name, where the content before the
'/' will be the system to use, and the content after will be the event
name.
echo 'p:my_system/my_event' > kprobe_events
But this is inconsistent with the way histogram triggers separate their
system / event names. The histogram triggers use a '.' delimiter, which
can be confusing.
To allow this to be more consistent, as well as keep backward
compatibility, allow the kprobe and uprobe events to denote a system name
with either a '/' or a '.'.
That is:
echo 'p:my_system/my_event' > kprobe_events
is equivalent to:
echo 'p:my_system.my_event' > kprobe_events
Link: https://lore.kernel.org/linux-trace-devel/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Masami Hiramatsu <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The two places that call traceprobe_parse_probe_arg() allocate a temporary
buffer to copy the argv[i] into, because argv[i] is constant and the
traceprobe_parse_probe_arg() will modify it to do the parsing. These two
places allocate this buffer and then free it right after calling this
function, leaving the onus of this allocation to the caller.
As there's about to be a third user of this function that will have to do
the same thing, instead of having the caller allocate the temporary
buffer, simply move that allocation into the traceprobe_parse_probe_arg()
itself, which will simplify the code of the callers.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
As dynamic events are not created by modules, if something is attached to
one, calling "try_module_get()" on its "mod" field, is not going to keep
the dynamic event from going away.
Since dynamic events do not need the "mod" pointer of the event structure,
make a union out of it in order to save memory (there's one structure for
each of the thousand+ events in the kernel), and have any event with the
DYNAMIC flag set to use a ref counter instead.
Link: https://lore.kernel.org/linux-trace-devel/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Masami Hiramatsu <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
To differentiate between static and dynamic events, add a new flag
DYNAMIC to the event flags that all dynamic events have set. This will
allow to differentiate when attaching to a dynamic event from a static
event.
Static events have a mod pointer that references the module they were
created in (or NULL for core kernel). This can be incremented when the
event has something attached to it. But there exists no such mechanism for
dynamic events. This is dangerous as the dynamic events may now disappear
without the "attachment" knowing that it no longer exists.
To enforce the dynamic flag, change dyn_event_add() to pass the event that
is being created such that it can set the DYNAMIC flag of the event. This
helps make sure that no location that creates a dynamic event misses
setting this flag.
Link: https://lore.kernel.org/linux-trace-devel/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Masami Hiramatsu <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The "latency" tracers have some different requirements than normal
tracing, and also includes Daniel as a maintainer. Add a section in the
MAINTAINERS file to help direct patches and bug reports to these tracers
to the right people.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Fix function name in tracepoint.c kernel-doc comment
to remove a warning found by clang_w1.
kernel/tracepoint.c:589: warning: expecting prototype for register_tracepoint_notifier(). Prototype was for register_tracepoint_module_notifier() instead
kernel/tracepoint.c:613: warning: expecting prototype for unregister_tracepoint_notifier(). Prototype was for unregister_tracepoint_module_notifier() instead
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: zhaoxiao <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Since trigger_process_regex() modifies given trigger actions
while parsing, the error message couldn't show what command
was passed to the trigger_process_regex() when it returns
an error.
To fix that, show the backed up trigger action command
instead of parsed buffer.
Link: https://lkml.kernel.org/r/162856126413.203126.9465564928450701424.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Add multiple histograms support for each event. This allows
user to set multiple histograms to an event.
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist[.N] {
...
}
The 'N' is a digit started string and it can be omitted
for the default histogram.
For example, multiple hist triggers example in the
Documentation/trace/histogram.rst can be written as below;
ftrace.event.net.netif_receive_skb.hist {
1 {
keys = skbaddr.hex
values = len
filter = len < 0
}
2 {
keys = skbaddr.hex
values = len
filter = len > 4096
}
3 {
keys = skbaddr.hex
values = len
filter = len == 256
}
4 {
keys = skbaddr.hex
values = len
}
5 {
keys = len
values = common_preempt_count
}
}
Link: https://lkml.kernel.org/r/162856125628.203126.15846930277378572120.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Support multiple handlers for per-event histogram in boot-time tracing.
Since the histogram can register multiple same handler-actions with
different parameters, this expands the syntax to support such cases.
With this update, the 'onmax', 'onchange' and 'onmatch' handler subkeys
under per-event histogram option will take a number subkeys optionally
as below. (see [.N])
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
onmax|onchange[.N] { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch[.N] { event = <EVENT>; <ACTION> [= <PARAM>] }
}
The 'N' must be a digit (or digit started word).
Thus user can add several handler-actions to the histogram,
for example,
ftrace.event.SOMEGROUP.SOMEEVENT.hist {
keys = SOME_ID; lat = common_timestamp.usecs-$ts0
onmatch.1 {
event = GROUP1.STARTEVENT1
trace = latency_event, SOME_ID, $lat
}
onmatch.2 {
event = GROUP2.STARTEVENT2
trace = latency_event, SOME_ID, $lat
}
}
Then, it can trace the elapsed time from GROUP1.STARTEVENT1 to
SOMEGROUP.SOMEEVENT, and from GROUP2.STARTEVENT2 to
SOMEGROUP.SOMEEVENT with SOME_ID key.
Link: https://lkml.kernel.org/r/162856124905.203126.14913731908137885922.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Add a hist-trigger action syntax support to boot-time tracing.
Currently, boot-time tracing supports per-event actions as option
strings. However, for the histogram action, it has a special syntax
and usually needs a long action definition.
To make it readable and fit to the bootconfig syntax, this introduces
a new options for histogram.
Here are the histogram action options for boot-time tracing.
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
keys = <KEY>[,...]
values = <VAL>[,...]
sort = <SORT-KEY>[,...]
size = <ENTRIES>
name = <HISTNAME>
var { <VAR> = <EXPR> ... }
pause|continue|clear
onmax|onchange { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch { event = <EVENT>; <ACTION> [= <PARAM>] }
filter = <FILTER>
}
Where <ACTION> is one of below;
trace = <EVENT>, <ARG1>[, ...]
save = <ARG1>[, ...]
snapshot
Link: https://lkml.kernel.org/r/162856124106.203126.10501871028479029087.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Allow common_pid.execname to be saved in a variable in one histogram to be
passed to another histogram that can pass it as a parameter to a synthetic
event.
># echo 'hist:keys=pid:__arg__1=common_timestamp.usecs:arg2=common_pid.execname' \
> events/sched/sched_waking/trigger
># echo 'wakeup_lat s32 pid; u64 delta; char wake_comm[]' > synthetic_events
># echo 'hist:keys=next_pid:pid=next_pid,delta=common_timestamp.usecs-$__arg__1,exec=$arg2'\
':onmatch(sched.sched_waking).trace(wakeup_lat,$pid,$delta,$exec)' \
> events/sched/sched_switch/trigger
The above is a wake up latency synthetic event setup that passes the execname
of the common_pid that woke the task to the scheduling of that task, which
triggers a synthetic event that passes the original execname as a
parameter to display it.
># echo 1 > events/synthetic/enable
># cat trace
<idle>-0 [006] d..4 186.863801: wakeup_lat: pid=1306 delta=65 wake_comm=kworker/u16:3
<idle>-0 [000] d..4 186.863858: wakeup_lat: pid=163 delta=27 wake_comm=<idle>
<idle>-0 [001] d..4 186.863903: wakeup_lat: pid=1307 delta=36 wake_comm=kworker/u16:4
<idle>-0 [000] d..4 186.863927: wakeup_lat: pid=163 delta=5 wake_comm=<idle>
<idle>-0 [006] d..4 186.863957: wakeup_lat: pid=1306 delta=24 wake_comm=kworker/u16:3
sshd-1306 [006] d..4 186.864051: wakeup_lat: pid=61 delta=62 wake_comm=<idle>
<idle>-0 [000] d..4 186.965030: wakeup_lat: pid=609 delta=18 wake_comm=<idle>
<idle>-0 [006] d..4 186.987582: wakeup_lat: pid=1306 delta=65 wake_comm=kworker/u16:3
<idle>-0 [000] d..4 186.987639: wakeup_lat: pid=163 delta=27 wake_comm=<idle>
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Tom Zanussi <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Instead of kstrdup("const", GFP_KERNEL), have the hist_field type simply
assign the constant hist_field->type = "const"; And when the value passed
to it is a variable, use "kstrdup_const(var, GFP_KERNEL);" which will just
copy the value if the variable is already a constant. This saves on having
to allocate when not needed.
All frees of the hist_field->type will need to use kfree_const().
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Update both the tracefs README file as well as the histogram.rst to
include an explanation of what the buckets modifier is and how to use it.
Include an example with the wakeup_latency example for both log2 and the
buckets modifiers as there was no existing log2 example.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Namhyung Kim <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
There's been several times I wished the histogram logic had a "grouping"
feature for the buckets. Currently, each bucket has a size of one. That
is, if you trace the amount of requested allocations, each allocation is
its own bucket, even if you are interested in what allocates 100 bytes or
less, 100 to 200, 200 to 300, etc.
Also, without grouping, it fills up the allocated histogram buckets
quickly. If you are tracking latency, and don't care if something is 200
microseconds off, or 201 microseconds off, but want to track them by say
10 microseconds each. This can not currently be done.
There is a log2 but that grouping get's too big too fast for a lot of
cases.
Introduce a "buckets=SIZE" command to each field where it will record in a
rounded number. For example:
># echo 'hist:keys=bytes_req.buckets=100:sort=bytes_req' > events/kmem/kmalloc/trigger
># cat events/kmem/kmalloc/hist
# event histogram
#
# trigger info:
hist:keys=bytes_req.buckets=100:vals=hitcount:sort=bytes_req.buckets=100:size=2048
[active]
#
{ bytes_req: ~ 0-99 } hitcount: 3149
{ bytes_req: ~ 100-199 } hitcount: 1468
{ bytes_req: ~ 200-299 } hitcount: 39
{ bytes_req: ~ 300-399 } hitcount: 306
{ bytes_req: ~ 400-499 } hitcount: 364
{ bytes_req: ~ 500-599 } hitcount: 32
{ bytes_req: ~ 600-699 } hitcount: 69
{ bytes_req: ~ 700-799 } hitcount: 37
{ bytes_req: ~ 1200-1299 } hitcount: 16
{ bytes_req: ~ 1400-1499 } hitcount: 30
{ bytes_req: ~ 2000-2099 } hitcount: 6
{ bytes_req: ~ 4000-4099 } hitcount: 2168
{ bytes_req: ~ 5000-5099 } hitcount: 6
Totals:
Hits: 7690
Entries: 13
Dropped: 0
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Namhyung Kim <[email protected]>
Reviewed-by: Tom Zanussi <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Tested-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
The event filters are not applied on all of the output, which results in
the flood of printk when using tp_printk. Unfolding
event_trigger_unlock_commit_regs() into trace_event_buffer_commit(), so
the filters can be applied on every output.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 0daa230296 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()")
Signed-off-by: Pingfan Liu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Since the 'bootconfig' command line parameter is handled before
parsing the command line, it doesn't use early_param(). But in
this case, kernel shows a wrong warning message about it.
[ 0.013714] Kernel command line: ro console=ttyS0 bootconfig console=tty0
[ 0.013741] Unknown command line parameters: bootconfig
To suppress this message, add a dummy handler for 'bootconfig'.
Link: https://lkml.kernel.org/r/162812945097.77369.1849780946468010448.stgit@devnote2
Fixes: 86d1919a4f ("init: print out unknown kernel parameters")
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Commit 2860cd8a23 ("livepatch: Use the default ftrace_ops instead of
REGS when ARGS is available") intends to enable config LIVEPATCH when
ftrace with ARGS is available. However, the chain of configs to enable
LIVEPATCH is incomplete, as HAVE_DYNAMIC_FTRACE_WITH_ARGS is available,
but the definition of DYNAMIC_FTRACE_WITH_ARGS, combining DYNAMIC_FTRACE
and HAVE_DYNAMIC_FTRACE_WITH_ARGS, needed to enable LIVEPATCH, is missing
in the commit.
Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns:
DYNAMIC_FTRACE_WITH_ARGS
Referencing files: kernel/livepatch/Kconfig
So, define the config DYNAMIC_FTRACE_WITH_ARGS analogously to the already
existing similar configs, DYNAMIC_FTRACE_WITH_REGS and
DYNAMIC_FTRACE_WITH_DIRECT_CALLS, in ./kernel/trace/Kconfig to connect the
chain of configs.
Link: https://lore.kernel.org/kernel-janitors/CAKXUXMwT2zS9fgyQHKUUiqo8ynZBdx2UEUu1WnV_q0OCmknqhw@mail.gmail.com/
Link: https://lkml.kernel.org/r/[email protected]
Cc: Josh Poimboeuf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Miroslav Benes <[email protected]>
Cc: [email protected]
Fixes: 2860cd8a23 ("livepatch: Use the default ftrace_ops instead of REGS when ARGS is available")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Some extra flags are printed to the trace header when using the
PREEMPT_RT config. The extra flags are: need-resched-lazy,
preempt-lazy-depth, and migrate-disable.
Without printing these fields, the timerlat specific fields are
shifted by three positions, for example:
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# || /
# |||| ACTIVATION
# TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY
# | | | |||| | | | |
<idle>-0 [000] d..h... 3279.798871: #1 context irq timer_latency 830 ns
<...>-807 [000] ....... 3279.798881: #1 context thread timer_latency 11301 ns
Add a new header for timerlat with the missing fields, to be used
when the PREEMPT_RT is enabled.
Link: https://lkml.kernel.org/r/babb83529a3211bd0805be0b8c21608230202c55.1626598844.git.bristot@kernel.org
Cc: Tom Zanussi <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Some extra flags are printed to the trace header when using the
PREEMPT_RT config. The extra flags are: need-resched-lazy,
preempt-lazy-depth, and migrate-disable.
Without printing these fields, the osnoise specific fields are
shifted by three positions, for example:
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE %% OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-741 [000] ....... 1105.690909: 1000000 234 99.97660 36 21 0 1001 22 3
<...>-742 [001] ....... 1105.691923: 1000000 281 99.97190 197 7 0 1012 35 14
<...>-743 [002] ....... 1105.691958: 1000000 1324 99.86760 118 11 0 1016 155 143
<...>-744 [003] ....... 1105.691998: 1000000 109 99.98910 21 4 0 1004 33 7
<...>-745 [004] ....... 1105.692015: 1000000 2023 99.79770 97 37 0 1023 52 18
Add a new header for osnoise with the missing fields, to be used
when the PREEMPT_RT is enabled.
Link: https://lkml.kernel.org/r/1f03289d2a51fde5a58c2e7def063dc630820ad1.1626598844.git.bristot@kernel.org
Cc: Tom Zanussi <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
State transitions from 1->0->1 and N->2->1 callbacks require RCU
synchronization. Rather than performing the RCU synchronization every
time the state change occurs, which is quite slow when many tracepoints
are registered in batch, instead keep a snapshot of the RCU state on the
most recent transitions which belong to a chain, and conditionally wait
for a grace period on the last transition of the chain if one g.p. has
not elapsed since the last snapshot.
This applies to both RCU and SRCU.
This brings the performance regression caused by commit 231264d692
("Fix: tracepoint: static call function vs data state mismatch") back to
what it was originally.
Before this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m10.593s
user 0m0.017s
sys 0m0.259s
After this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m0.878s
user 0m0.000s
sys 0m0.103s
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/io-uring/[email protected]/
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Stefan Metzmacher <[email protected]>
Fixes: 231264d692 ("Fix: tracepoint: static call function vs data state mismatch")
Signed-off-by: Mathieu Desnoyers <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Masami Hiramatsu