Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Suggested-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: David Gow <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
As the CRTC requires a primary plane for display, ensure that the
primary plane is enabled with the CRTC.
Use drm_atomic_helper_check_crtc_state(). Add all affected planes
to the atomic state so that their state will be checked as well.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Simple-KMS helpers guarantee that the CRTC and plane enable
flags are synchronized. Implement this with atomic helpers
drm_atomic_helper_check_crtc_state() on the CRTC side, and
drm_atomic_helper_check_plane_state() on the plane side.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name.
Reported-by: Nuno Gonçalves <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Tested-by: Nuno Gonçalves <[email protected]>
Fixes: 67b723f5b7 ("drm/fb-helper: Calculate damaged area in separate helper")
Cc: Thomas Zimmermann <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: <[email protected]> # v5.18+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
v3:
* call aperture_remove_conflicting_pci_devices()
Reported-by: Laszlo Ersek <[email protected]>
Suggested-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
There will be more DRM drivers for firmware-provided framebuffers. Use
the existing entry for simpledrm instead of adding a new one for each
driver. Also add DRM's aperture helpers, which are part of the driver's
infrastructure.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
Fixes: 5fc537bfd0 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
This started with work on the removal of backlight_properties'
deprecated fb_blank field, much of which can be taken care of by using
helper functions provided by backlight.h instead of directly accessing
fields in backlight_properties. This patch series doesn't involve
fb_blank, but it still seems useful to use helper functions where
appropriate.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of setting the power state by manually updating fields in
struct backlight_properties, use backlight_enable() and
backlight_disable(). These also call backlight_update_status() so the
separate call is no longer needed.
Signed-off-by: Stephen Kitt <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of manually checking the power state in struct
backlight_properties, use backlight_is_blank().
While we're at it, drop .fb_blank from the initialisation function; it
is deprecated, and this helps make progress towards enabling its
removal. This change makes no functional difference since
FB_BLANK_UNBLANK is the default value.
Signed-off-by: Stephen Kitt <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
If the backlight node is not enabled, this (silently) returns with
-EPROBE_DEFER. /sys/kernel/debug/devices_deferred also shows nothing
helpful:
$ cat /sys/kernel/debug/devices_deferred
display
With this patch, there is a helpful hint:
$ cat /sys/kernel/debug/devices_deferred
display panel-simple: Could not find backlight
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/pl111/pl111_display.c
line: 251
* Note that the the ARM hardware's format reader takes 'r' from
changed to
* Note that the the ARM hardware's format reader takes 'r' from
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Before this change nouveau's Kconfig section had 2 "select ACPI_VIDEO"
statements:
select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && INPUT
select ACPI_VIDEO if ACPI && X86
Drop the one with the extra conditions, if the conditions for that
one are true then the second statement will always select ACPI_VIDEO
already.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Fix a number of compile errors by including the correct header
files. Examples are shown below.
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
25 | struct hyperv_drm_device *hv = to_hv(fb->dev);
| ^~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
59 | count = drm_add_modes_noedid(connector,
| ^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]
62 | drm_set_preferred_mode(connector, hv->preferred_width,
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Fixes: 720cf96d8f ("drm: Drop drm_framebuffer.h from drm_crtc.h")
Fixes: 255490f915 ("drm: Drop drm_edid.h from drm_crtc.h")
Cc: Deepak Rawat <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v5.14+
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_ioctl.c
line: 86
* means the the unique name for the master node just opening is _not_ filled
changed to
* means the unique name for the master node just opening is _not_ filled
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_panel_orientation_quirks.c
line: 196
* GPD Pocket, note that the the DMI data is less generic then
changed to
* GPD Pocket, note that the DMI data is less generic then
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/vc4/vc4_regs.h
line: 267
/* Set when the the downstream tries to read from the display FIFO
changed to
/* Set when the downstream tries to read from the display FIFO
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_prime.c
line: 842
* of the the buffer described by the provided sg_table.
changed to
* of the buffer described by the provided sg_table.
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
line: 1051
* have the the deepest nesting of page tables.
changed to
* have the deepest nesting of page tables.
Signed-off-by: Jiang Jian <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Yannick Fertre