Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to
clear the firmware previous profile state. There is one case in linux host
driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD.
This causes firmware state to mismatch causing an ASSERT. Use the driver
state variable arConnectPending to track whether a WMI_CONNECT_CMD is
issued to firmware.
Signed-off-by: Vipin Mehta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Return correct scan complete status to the cfg80211 module based on
the value returned from the hardware.
Signed-off-by: Vipin Mehta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario
where the EAPOL frames were going encrypted during an auto reconnection
attempt. The initial 4-way handshake would go fine but then the driver
was getting a command to set default keys sometime later. Setting of an
incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during
the subsequent 4-way handshake attempts to go encrypted causing the AP to
reject the station.
Signed-off-by: Vipin Mehta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The driver was dereferencing a NULL pointer because of the device instance
being registered via the set_wiphy_dev() function. The function
ar6000_avail_ev() was passing the argument as NULL instead of using the one
returned by the MMC stack through the probe callback.
Signed-off-by: Vipin Mehta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Currently the device is initialized when first write is done to the
device. Any read attempt before the first write would fail, including
"hidden" read the user may not know about (as for example if he tries
to write a partial block).
This patch initializes the device on first request, whether read or
write.
Signed-off-by: Jerome Marchand <[email protected]>
Cc: Nitin Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Get rid of unused stubs for trigger and buffer support.
Fix line length issues.
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Removed stubs related to buffering and triggering. Put them back
when they are actually needed.
Fixed line length issues.
Made a number of functions static as no longer in header.
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Also added a device id table to the spi version.
Signed-off-by: Jonathan Cameron <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur
Signed-off-by: Jonathan Cameron <[email protected]>
Tested-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
A very simple use of a kfifo as an alternative for the ring_sw
Signed-off-by: Jonathan Cameron <[email protected]>
Tested-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.
Signed-off-by: Jonathan Cameron <[email protected]>
Tested-by: Michael Hennerich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.
Signed-off-by: Tony SIM <[email protected]>
Signed-off-by: Andrew Chew <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.
Signed-off-by: David Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The subject says it all. There is no need to
specify different page protection bits based
on the architecture.
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Hank Janssen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Hank Janssen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Hank Janssen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Hank Janssen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Roland Vossen <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Roland Vossen <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Roland Vossen <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This patch takes care of that.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The driver has flags for association state which are now being set
according to notification from mac80211.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The implementation for bss_info_changed was not handling all
changes as provided by mac80211 module. These have been added
and will log message with changed parameters.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The 802.11 core in the chipsets provides counters that are now
used to provide counter values to mac80211 through get_stats
callback. Counters related to ampdu and wmm (aka. wme) are not
yet incorporated.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Allocation of buffer in function wl_ucode_init_buf can fail. This was
signalled by an error message, but code continued to access the null
pointer. This is now avoided by jumping to failure label.
Reviewed-by: Roland Vossen <[email protected]>
Reviewed-by: Brett Rudley <[email protected]>
Reviewed-by: Henry Ptasinski <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Vipin Mehta