Also fixed a memory leak in the probe function if an error occurred.
The gain control range was also fixed (a proper range from -64 to 64).
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
When a device is not detected, the driver prints a warning message.
That's ok, except for the fact that, even on newer devices that have
eeprom but aren't yet supported, it prints a message saying that the
device doesn't have eeprom.
Fix it by having a separate message for devices with eeprom, but not
yet known by the driver.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
drivers/media/dvb/ngene/ngene-i2c.o: In function `cxd2099_attach':
ngene-i2c.c:(.text+0x195): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-cards.o: In function `cxd2099_attach':
ngene-cards.c:(.text+0x116): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-dvb.o: In function `cxd2099_attach':
ngene-dvb.c:(.text+0x7ad): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This driver is abusing the kernel<=>userspace API, due to the lack of a
proper solution for it. A discussion were done at:
http://www.mail-archive.com/[email protected]/msg22196.html
But there's not a solution for it yet. So, move the driver to staging, while
we don't have a final solution.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
22kHz workaround must also be performed for the 2nd frontend.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Manu Abraham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Refactored code for channel initialisation and release:
- Do not create device nodes which are not required.
- Better error handling.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Do not clear registers ACLC/BCLC in DVB-S2 mode for Cut <= 20.
Otherwise, the demod could lose the lock periodically.
Verified with cineS2 and Duoflex.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Manu Abraham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Add dvb net device.
Note that the physical address must be setup manually.
Signed-off-by: Ralph Metzler <[email protected]>
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Driver for the Common Interface Controller CXD2099AR.
Supports the CI of the cineS2 DVB-S2.
For now, data is passed through '/dev/dvb/adapterX/sec0':
- Encrypted data must be written to 'sec0'.
- Decrypted data can be read from 'sec0'.
- Setup the CAM using device 'ca0'.
Signed-off-by: Ralph Metzler <[email protected]>
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
If tuner initialisation failed, the frontend node was not removed.
When the frontend was opened, a kernel oops occurred...
This is the first step to improve error handling during initialisation.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Support up to 4 tuners for cineS2 v5, duoflex & mystique v2.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The STV0900 features two demodulator paths in one chip. Thus it is not
possible to use the generic power off function of the chip when sending
one of them to standby. The other path will stop working in that case.
The sleep function now switches off functionality specific to the demod
path. The global stuff is only switched off, when both paths are in
sleep mode. The wakeup function always turns on the global functionality
and then works specific to the path.
Signed-off-by: Andreas Regel <[email protected]>
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Manu Abraham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
Cc: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch adds support for the SoC DiB7090 DVB-T demodulator and its
melt-in UHF/VHF RF tuner.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patchs add initial support for the DiB9000-device. This
demodulator is firmware-driven.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch adds several performance improvements and prepares the
usage of firmware-based devices.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch adds the possibitity to use different I2C-ports to talk to
slave-devices than the standard ones.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch adds a set a functions which allow the handling of multiple
demodulator in a diversity reception chain.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This commit adds a function to the DiB0700 USB driver which allows
drivers to change the I2C clock speed.
Signed-off-by: Olivier Grenie <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Add I2C/V4L2 subdev driver for Siliconfile NOON010PC30 CIF camera.
The driver implements basic functionality, i.e. CIF/QCIF/QQCIF
resolution and color format selection, automatic/manual color
balance control. Other functions like cropping, rotation/flip,
exposure etc. can be easily implemented if needed.
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Add ID for NOON010PC30 camera chip and reserve ID range for
Siliconfile sensors.
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
When is called fimc_stop_capture, it seems that wait_event_timeout
used improperly. It should be wake up by irq handler.
Reviewed-by Jonghun Han <[email protected]>
Signed-off-by: Sungchun Kang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch fixes the value of FIFO_CTRL in MSCTRL.
Main-scaler has the value to specify a basis FIFO control of input DMA.
The description of FIFO_CTRL has been changed as below.
0 = FIFO Empty (Next burst transaction is possible when FIFO is empty)
1 = FIFO Full (Next burst transaction is possible except Full FIFO)
Value '1' is recommended to enhance the FIMC operation performance.
Reviewed-by: Jonghun Han <[email protected]>
Signed-off-by: Hyunwoong Kim <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This patch adds callback functions, stop_streaming and job_abort,
to abort or finish any DMA in progress. stop_streaming is called
by videobuf2 framework and job_abort is called by m2m framework.
ST_M2M_PEND state is added to discard the next job.
Reviewed-by: Jonghun Han <[email protected]>
Signed-off-by: Hyunwoong Kim <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Horizontal and vertical scaling range are according to the following equations.
If (SRC_Width >= 64 x DST_Width) { Exit(-1); /* Out of Horizontal scale range}
If (SRC_Height >= 64 x DST_Height) { Exit(-1); /* Out of Vertical scale range}
fimc_check_scaler_ratio() is used to check if horizontal and vertical
scale range are valid or not. To use fimc_check_scaler_ratio,
source and destination format should be set by VIDIOC_S_FMT.
And in case of scaling up, it doesn't have to check the scale range.
Reviewed-by: Jonghun Han <[email protected]>
Signed-off-by: Hyunwoong Kim <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The main scaler has four SFRs for main scaler ratio depending on FIMC version.
FIMC 4.x has only two SFRs and FIMC 5.x has four SFRs for main scaler.
Those are MainHorRatio, MainHorRatio_ext, MainVerRatio and MainverRatio_ext.
The FIMC 5.x has 15 bit resolution for scaling ratio as below.
{MainHorRatio,MainHorRatio_ext} = {[14:6],[5:0]}.
{MainVerRatio,MainVerRatio_ext} = {[14:6],[5:0]}.
MainHorRatio = CISCCTRL[24:16], MainHorRatio_ext = CIEXTEN[15:10]
MainVerRatio = CISCCTRL[8:0], MainVerRatio_ext = CIEXTEN[5:0]
This patch supports FIMC 4.x and FIMC 5.x using platform_device_id::driver_data.
Reviewed-by: Jonghun Han <[email protected]>
Signed-off-by: Hyunwoong Kim <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Some color formats are mismatched in s5p-fimc driver.
CIOCTRL[1:0], order422_out, should be set 2b'00 not 2b'11
to use V4L2_PIX_FMT_YUYV. Because in V4L2 standard V4L2_PIX_FMT_YUYV means
"start + 0: Y'00 Cb00 Y'01 Cr00 Y'02 Cb01 Y'03 Cr01". According to datasheet
2b'00 is right value for V4L2_PIX_FMT_YUYV.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Manage the camera sensor clock in the host driver rather than
leaving this task for sensor drivers. The clock frequency
must be passed in the sensor's and host driver's platform data.
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Map all (0, 90, 180, 270) deg counterclockwise rotation and
horizontal and vertical flip controls to (0, 90) deg rotation,
horizontal and vertical flip transformations available
in the device.
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Hans Verkuil