Fixes for omaps for v5.14-rc series
Some fixes for regressions and boot issues for various devices:
- Fix gpt12 system timer regression on earlier beagleboard revisions
- Fix potential NULL pointer access for omap_hwmod_get_pwrdm()
- Disable RNG on secure am335x variants as it's not accessible
- Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing
i2c0 bus speed for tps65218
- Fix typo for am437x-l4 can@0 node
- Fix omap5 regression caused by vdds_1v8_main fixed-regulator
* tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
bus: ti-sysc: Fix gpt12 system timer issue with reserved status
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
I saw the build failure that was fixed in commit 6387f65e2a ("net:
sparx5: fix compiletime_assert for GCC 4.9") and noticed another
issue that was introduced in the same patch: Using GENMASK() to
create a 64-bit mask does not work on 32-bit architectures.
This probably won't ever happen on this driver since it's specific
to a 64-bit SoC, but it's better to write it portably, so use
GENMASK_ULL() instead.
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Sparse reports a compile time warning when dereferencing an
__iomem pointer:
drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression
Use __raw_readl() here for consistency with the rest of the file.
This should really get converted to some proper accessor, as the
__raw functions are not meant to be used in drivers, but the driver
has used these since the start, so for the moment, let's only fix
the warning.
Reported-by: kernel test robot <[email protected]>
Fixes: d4c9e9fc97 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.")
Signed-off-by: Arnd Bergmann <[email protected]>
When compile-testing with 64-bit resource_size_t, gcc reports an invalid
printk format string:
In file included from include/linux/dma-mapping.h:7,
from drivers/soc/ixp4xx/ixp4xx-npe.c:15:
drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe':
drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n",
Use the special %pR format string to print the resources.
Fixes: 0b458d7b10 ("soc: ixp4xx: npe: Pass addresses as resources")
Signed-off-by: Arnd Bergmann <[email protected]>
mvebu fixes for 5.14 (part 1)
- Fix i2c property for armada-3720-turris-mox in order to use SFP
- Add mmc alias on armada-3720-turris-mox to allow rootfs using the
right mmc
* tag 'mvebu-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
Link: https://lore.kernel.org/r/87k0l7zx4v.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <[email protected]>
STM32 DT fixes for v5.14, round 1
Highlights:
-----------
-Fixes are for DHCOM/DHCOR boards:
- Set HW RTC ad default RTC
- Disable EDPD LAN8710 feature as it is not a stable feature.
- Fix touchscreen IRQ line assignment
* tag 'stm32-dt-for-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
tee: Improve support for kexec and kdump
This fixes several bugs uncovered while exercising the OP-TEE, ftpm
(firmware TPM), and tee_bnxt_fw (Broadcom BNXT firmware manager) drivers
with kexec and kdump (emergency kexec) based workflows.
* tag 'tee-kexec-fixes-for-v5.14' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
firmware: tee_bnxt: Release TEE shm, session, and context during kexec
tpm_ftpm_tee: Free and unregister TEE shared memory during kexec
tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag
tee: add tee_shm_alloc_kernel_buf()
optee: Clear stale cache entries during initialization
optee: fix tee out of memory failure seen during kexec reboot
optee: Refuse to load the driver under the kdump kernel
optee: Fix memory leak when failing to register shm pages
Link: https://lore.kernel.org/r/20210726081039.GA2482361@jade
Signed-off-by: Arnd Bergmann <[email protected]>
i.MX fixes for 5.14:
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0 ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
* tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
Revert "soc: imx8m: change to use platform driver"
ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms
ARM: imx: common: Move prototype outside the SMP block
ARM: imx: add missing clk_disable_unprepare()
ARM: imx: add missing iounmap()
arm64: dts: ls1028a: fix node name for the sysclk
Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon
Signed-off-by: Arnd Bergmann <[email protected]>
When this driver is disabled, the board file fails to build,
so add a dependency:
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration]
472 | ixp4xx_pci_preinit();
| ^~~~~~~~~~~~~~~~~~
| iop3xx_pci_preinit
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration]
481 | if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
| ^~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function)
231 | .start = IXP4XX_UART1_BASE_PHYS,
| ^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration]
376 | ixp4xx_sys_init();
| ^~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
arm64: tegra: Device tree fixes for v5.14-rc3
This contains one more fix for SMMU enablement on Tegra194, this time
for PCIe.
* tag 'tegra-for-5.14-rc3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support for PCIe on Tegra194
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
This is one of the last modules using the old calling conventions
for module init/exit functions. Change it over to the style used
everywhere else.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
The only user of this variable is in an #ifdef:
net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head':
net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable]
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
The rework of the ixp46x cpu detection left the network driver in
a half broken state:
drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)
290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level:
drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror]
323 | module_init(ptp_ixp_init);
I have patches to complete the transition for a future release, but
for the moment, add the missing include statements to get it to build
again.
Fixes: 09aa9aabdc ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
ARM SCMI fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fix for possible scmi_linux_errmap buffer overflow
- fix to avoid sensor message structure padding
- fix the range check for the maximum number of pending SCMI messages
- fix for various kernel-doc warnings
* tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
firmware: arm_scmi: Simplify device probe function on the bus
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Arm FF-A fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fixing possible ffa_linux_errmap buffer overflow and
- fixing kernel-doc warning for comment style
* tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
arm64: tegra: Device tree fixes for v5.14-rc1
This contains two late fixes for Tegra194 device tree files to restore
USB and audio functionality after enabling system-wide IOMMU support.
* tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support for USB on Tegra194
arm64: tegra: Enable audio IOMMU support on Tegra194
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Memory controller drivers for v5.14 - Tegra SoC, late fixes
Two fixes for recent series of changes in Tegra SoC memory controller
drivers:
1. Add a stub for tegra_mc_probe_device() to fix compile testing of
arm-smmu without TEGRA_MC.
2. Fix arm-smmu dtschema syntax.
* tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: arm-smmu: Fix json-schema syntax
memory: tegra: Add compile-test stub for tegra_mc_probe_device()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec67875 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a57 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
gcc-11 points out that modifying local variables next to a
longjmp/setjmp may cause undefined behavior:
arch/powerpc/kexec/crash.c: In function 'crash_kexec_prepare_cpus.constprop':
arch/powerpc/kexec/crash.c:108:22: error: variable 'ncpus' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbere
d]
arch/powerpc/kexec/crash.c:109:13: error: variable 'tries' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbere
d]
arch/powerpc/xmon/xmon.c: In function 'xmon_print_symbol':
arch/powerpc/xmon/xmon.c:3625:21: error: variable 'name' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'stop_spus':
arch/powerpc/xmon/xmon.c:4057:13: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'restart_spus':
arch/powerpc/xmon/xmon.c:4098:13: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'dump_opal_msglog':
arch/powerpc/xmon/xmon.c:3008:16: error: variable 'pos' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'show_pte':
arch/powerpc/xmon/xmon.c:3207:29: error: variable 'tsk' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'show_tasks':
arch/powerpc/xmon/xmon.c:3302:29: error: variable 'tsk' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c: In function 'xmon_core':
arch/powerpc/xmon/xmon.c:494:13: error: variable 'cmd' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c:860:21: error: variable 'bp' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c:860:21: error: variable 'bp' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/xmon/xmon.c:492:48: error: argument 'fromipi' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
According to the documentation, marking these as 'volatile' is
sufficient to avoid the problem, and it shuts up the warning.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
clang is a little overzealous with warning about a constant conversion
in an untaken branch of a ternary expression:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion]
.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX,
^~~~~~~~~~~~
Rewrite this to use a preprocessor conditional instead to avoid the
warning.
Fixes: 076437c9e3 ("drm/msm/dsi: move min/max PLL rate to phy config")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
The driver is almost portable already, it just needs to
include the new header for the cpu definition.
Cc: Deepak Saxena <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Portable drivers cannot use mach/platform.h, so move the
structure into its own header. With this, compile testing
can be enabled.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Generic drivers are unable to use the feature macros from mach/cpu.h
or the feature bits from mach/hardware.h, so move these into a global
header file along with some dummy helpers that list these features as
disabled elsewhere.
Cc: David S. Miller <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: Zoltan HERPAI <[email protected]>
Cc: Raylynn Knight <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
The saa6588_ioctl() function expects to get called from other kernel
functions with a 'saa6588_command' pointer, but I found nothing stops it
from getting called from user space instead, which seems rather dangerous.
The same thing happens in the davinci vpbe driver with its VENC_GET_FLD
command.
As a quick fix, add a separate .command() callback pointer for this
driver and change the two callers over to that. This change can easily
get backported to stable kernels if necessary, but since there are only
two drivers, we may want to eventually replace this with a set of more
specialized callbacks in the long run.
Fixes: c3fda7f835 ("V4L/DVB (10537): saa6588: convert to v4l2_subdev.")
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This is one of the last remaining users of compat_alloc_user_space()
and copy_in_user(), which are in the process of getting removed.
As of commit 57e6b6f230 ("media: atomisp_fops.c: disable
atomisp_compat_ioctl32"), nothing in this file is actually getting used
as the only reference has been stubbed out.
Remove the entire file -- anyone willing to restore the functionality
can equally well just look up the contents in the git history if needed.
Acked-by: Sakari Ailus <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
I spotted a minor difference is handling of unregistered devices
between native and compat ioctls: the native handler never tries
to call into the driver if a device is not marked as registered.
I did not check whether this can cause issues in the kernel, or
just a different between return codes, but it clearly makes
sense that both should behave the same way.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Converting the VIDIOC_DQEVENT_TIME32/VIDIOC_DQEVENT32/
VIDIOC_DQEVENT32_TIME32 arguments to the canonical form is done in common
code, but for some reason I ended up adding another conversion helper to
subdev_do_ioctl() as well. I must have concluded that this does not go
through the common conversion, but it has done that since the ioctl
handler was first added.
I assume this one is harmless as there should be no way to arrive here
from user space if CONFIG_COMPAT_32BIT_TIME is set, but since it is dead
code, it should just get removed.
On a 64-bit architecture, as well as a 32-bit architecture without
CONFIG_COMPAT_32BIT_TIME, handling this command is a mistake,
and the kernel should return an error.
Fixes: 1a6c0b36dd ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The initialization was indented with an extra tab in most lines,
remove them to get the normal coding style.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
As seen from a recent syzbot bug report, mistakes in the compat ioctl
implementation can lead to uninitialized kernel stack data getting used
as input for driver ioctl handlers.
The reported bug is now fixed, but it's possible that other related
bugs are still present or get added in the future. As the drivers need
to check user input already, the possible impact is fairly low, but it
might still cause an information leak.
To be on the safe side, always clear the entire ioctl buffer before
calling the conversion handler functions that are meant to initialize
them.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Syzbot found that passing ioctl command 0xc0505609 into a 64-bit
kernel from a 32-bit process causes uninitialized kernel memory to
get passed to drivers instead of the user space data:
BUG: KMSAN: uninit-value in check_array_args drivers/media/v4l2-core/v4l2-ioctl.c:3041 [inline]
BUG: KMSAN: uninit-value in video_usercopy+0x1631/0x3d30 drivers/media/v4l2-core/v4l2-ioctl.c:3315
CPU: 0 PID: 19595 Comm: syz-executor.4 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
check_array_args drivers/media/v4l2-core/v4l2-ioctl.c:3041 [inline]
video_usercopy+0x1631/0x3d30 drivers/media/v4l2-core/v4l2-ioctl.c:3315
video_ioctl2+0x9f/0xb0 drivers/media/v4l2-core/v4l2-ioctl.c:3391
v4l2_ioctl+0x255/0x290 drivers/media/v4l2-core/v4l2-dev.c:360
v4l2_compat_ioctl32+0x2c6/0x370 drivers/media/v4l2-core/v4l2-compat-ioctl32.c:1248
__do_compat_sys_ioctl fs/ioctl.c:842 [inline]
__se_compat_sys_ioctl+0x53d/0x1100 fs/ioctl.c:793
__ia32_compat_sys_ioctl+0x4a/0x70 fs/ioctl.c:793
do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline]
__do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
The time32 commands are defined but were never meant to be called on
64-bit machines, as those have always used time64 interfaces. I missed
this in my patch that introduced the time64 handling on 32-bit platforms.
The problem in this case is the mismatch of one function checking for
the numeric value of the command and another function checking for the
type of process (native vs compat) instead, with the result being that
for this combination, nothing gets copied into the buffer at all.
Avoid this by only trying to convert the time32 commands when running
on a 32-bit kernel where these are defined in a meaningful way.
[hverkuil: fix 3 warnings: switch with no cases]
Fixes: 577c89b0ce ("media: v4l2-core: fix v4l2_buffer handling for time64 ABI")
Reported-by: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
clang complains about multiple instances of printing an integer
using the %hhx format string:
drivers/iio/light/si1133.c:982:4: error: format specifies type 'unsigned char' but the argument has type 'unsigned int' [-Werror,-Wformat]
part_id, rev_id, mfr_id);
^~~~~~~
Print them as a normal integer instead, leaving the "#02"
length modifier.
Use the 0x02x form as the length specifier when used with # includes
the 0x prefix and is very unlikely to be what was intended by the author.
Fixes: e01e7eaf37 ("iio: light: introduce si1133")
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
The last user of clkdev_alloc() and clkdev_hw_alloc() was
removed last year, so everything now calls clkdev_create()
and clkdev_hw_create() instead.
Removing the unused functions lets the compiler optimize
the remaining ones slightly better.
Fixes: e5006671ac ("clk: versatile: Drop the legacy IM-PD1 clock code")
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <[email protected]>
Only three SoCs remain that use the custom clk_get/clk_put.
Move these over to clkdev_lookup tables as well. As before,
treat the "sys.0" and "pll.0" clocks as system-wide clocks,
and all the other ones as device specific.
The "name" field in 'struct clock' is now unused, so rename
that as well as a cleanup and to reduce the object code size.
The DEFINE_CLK macro could be changed the same way, but it
is less churn to just leave those in place, that can be
done as a follow-up later if someone is interested.
Acked-by: Greg Ungerer <[email protected]>
Tested-by: Greg Ungerer <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.
Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.
Also leave the four SoCs that have gated clocks.
Acked-by: Greg Ungerer <[email protected]>
Tested-by: Greg Ungerer <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
ralink only has a very trivial clock implementation, with everything
being fixed clocks.
Convert it to CONFIG_COMMON_CLK to reduce the number of platforms
that rely on legacy clocks. Of course, the clocks really should
be read from the device tree instead, but this is a step into that
direction.
This adds about 50KB to the kernel image size, which is an unfortunate
increase, but not as bad as I had feared:
text data bss dec hex filename
3778560 1582216 92256 5453032 5334e8 vmlinux-vocore-before
3822148 1601192 92304 5515644 54297c vmlinux-vocore-after
3870226 1644468 200192 5714886 5733c6 vmlinux-rt305x-before
3916727 1668404 200240 5785371 58471b vmlinux-rt305x-after
Signed-off-by: Arnd Bergmann <[email protected]>
Perform a minimal conversion of the ar7 clock implementation to the common
clock framework. While the hardware can control the rates, this is left
unchanged, and all clocks are registered as fixed-rate or fixed-divider
clocks. Similarly, the clkdev lookup information is left unchanged but
moved from the table format into individual allocations.
There is a small increase in code size:
text data bss dec hex filename
4757116 596640 91328 5445084 5315dc vmlinux-before
4806159 602360 91344 5499863 53ebd7 vmlinux-after
Signed-off-by: Arnd Bergmann <[email protected]>
ar7 is one of only two platforms that provide the clock interface but
implement a custom version of the clkdev_lookup code.
Change this to use the generic version instead.
Signed-off-by: Arnd Bergmann <[email protected]>
In some configurations when building with gcc-11, prepare_page_table
does not get inline, which causes a build time warning for a section
mismatch:
WARNING: modpost: vmlinux.o(.text.unlikely+0xce8): Section mismatch in reference from the function prepare_page_table() to the (unknown reference) .init.data:(unknown)
The function prepare_page_table() references
the (unknown reference) __initdata (unknown).
This is often because prepare_page_table lacks a __initdata
annotation or the annotation of (unknown) is wrong.
Mark the function as __init to avoid the warning regardless of the
inlining, and remove the 'inline' keyword. The compiler is
free to ignore the 'inline' here and it doesn't result in better
object code or more readable source.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.
Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.
This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.
Cc: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
When building the kernel wtih gcc-10 or higher using the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly
different set of registers for the inline assembly in cpu_init() that
subsequently results in a corrupt kernel stack as well as remaining in
FIQ mode. If a banked register is used for the last argument, the wrong
version of that register gets loaded into CPSR_c. When building in Arm
mode, the arguments are passed as immediate values and the bug cannot
happen.
This got introduced when Daniel reworked the FIQ handling and was
technically always broken, but happened to work with both clang and gcc
before gcc-10 as long as they picked one of the lower registers.
This is probably an indication that still very few people build the
kernel in Thumb2 mode.
Marek pointed out the problem on IRC, Arnd narrowed it down to this
inline assembly and Russell pinpointed the exact bug.
Change the constraints to force the final mode switch to use a non-banked
register for the argument to ensure that the correct constant gets loaded.
Another alternative would be to always use registers for the constant
arguments to avoid the #ifdef that has now become more complex.
Cc: <[email protected]> # v3.18+
Cc: Daniel Thompson <[email protected]>
Reported-by: Marek Vasut <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Fixes: c0e7f7ee71 ("ARM: 8150/3: fiq: Replace default FIQ handler")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King <[email protected]>
When LLCC support is in a loadable module, the adreno support
cannot be built-in:
aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_gpu_init':
a6xx_gpu.c:(.text+0xe0): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xe0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0xec): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_destroy':
a6xx_gpu.c:(.text+0x274): undefined reference to `llcc_slice_putd'
a6xx_gpu.c:(.text+0x274): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_putd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0x27c): undefined reference to `llcc_slice_putd'
Add a Kconfig dependency that disallows the broken configuration
but allows all working ones.
Fixes: 474dadb8b0 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Arnd Bergmann <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Sai Prakash Ranjan <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Since commit 83109d5d5f ("x86/build: Warn on orphan section placement"),
we get a warning for objects in orphan sections. The cpuidle implementation
for OMAP causes this when CONFIG_CPU_IDLE is disabled:
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
Change the definition of CPUIDLE_METHOD_OF_DECLARE() to silently
drop the table and all code referenced from it when CONFIG_CPU_IDLE
is disabled.
Fixes: 06ee7a950b ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
A phys_addr_t may be wider than an int or pointer:
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_da_to_pa':
drivers/remoteproc/stm32_rproc.c:583:30: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t' {aka 'long long unsigned int'} [-Werror=format=]
583 | dev_dbg(dev, "da %llx to pa %#x\n", da, *pa);
Print it by reference using the special %pap format string.
Reviewed-by: Arnaud Pouliquen <[email protected]>
Fixes: 8a471396d2 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
clang doesn't like printing a 32-bit integer using %hX format string:
drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~~
Use an explicit cast to truncate it to the low 16 bits instead.
Fixes: 9ee3e06610 ("HID: i2c-hid: override HID descriptors for certain devices")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The added Kconfig dependency is slightly incorrect, which can
lead to a link failure when the watchdog is a loadable module:
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers':
rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time':
rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable':
rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock'
The problem is that it allows to be built-in if MFD_ROHM_BD71828
is built-in, even when the watchdog is a loadable module.
Rework this so that having the watchdog as a loadable module always
forces the rtc to be a module as well instead of built-in,
regardless of bd71828.
Fixes: c56dc069f2 ("rtc: bd70528: Support RTC on ROHM BD71815")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function. Without the extra __meminit annotation we get this
warning:
WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
The function shuffle_zone() references
the function __meminit __shuffle_zone().
This is often because shuffle_zone lacks a __meminit
annotation or the annotation of __shuffle_zone is wrong.
shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Dan Williams <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
I came across a randconfig build failure from one driver
that only depends on CONFIG_USB_ARCH_HAS_HCD but fails when
built without CONFIG_USB:
ld: drivers/media/rc/ir_toy.o: in function `irtoy_disconnect':
ir_toy.c:(.text+0x24): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x2c): undefined reference to `usb_free_urb'
ld: ir_toy.c:(.text+0x34): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x3c): undefined reference to `usb_free_urb'
Upon a closer look, I find that a lot of the other drivers
'select USB' rather than stating 'depends on USB' as is common
for most subsystems. I also find that all except one driver
have an extra 'depends on RC_CORE' that is already implied by
the top-level 'if RC_CORE' check.
Clean up both by reducing the dependencies to the required set.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Clang complains about the assignment of SSAM_ANY_IID to
ssam_device_uid->instance:
drivers/platform/surface/surface_aggregator_registry.c:478:25: error: implicit conversion from 'int' to '__u8' (aka 'unsigned char') changes value from 65535 to 255 [-Werror,-Wconstant-conversion]
{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
~ ^~~~~~~~~~~~
include/linux/surface_aggregator/device.h:71:23: note: expanded from macro 'SSAM_ANY_IID'
#define SSAM_ANY_IID 0xffff
^~~~~~
include/linux/surface_aggregator/device.h:126:63: note: expanded from macro 'SSAM_VDEV'
SSAM_DEVICE(SSAM_DOMAIN_VIRTUAL, SSAM_VIRTUAL_TC_##cat, tid, iid, fun)
^~~
include/linux/surface_aggregator/device.h:102:41: note: expanded from macro 'SSAM_DEVICE'
.instance = ((iid) != SSAM_ANY_IID) ? (iid) : 0, \
^~~
The assignment doesn't actually happen, but clang checks the type limits
before checking whether this assignment is reached. Replace the ?:
operator with a __builtin_choose_expr() invocation that avoids the
warning for the untaken part.
Fixes: eb0e90a820 ("platform/surface: aggregator: Add dedicated bus and device type")
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Maximilian Luz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
clang with CONFIG_LTO_CLANG points out that an initcall function should
return an 'int' due to the changes made to the initcall macros in commit
3578ad11f3 ("init: lto: fix PREL32 relocations"):
kernel/kcsan/debugfs.c:274:15: error: returning 'void' from a function with incompatible result type 'int'
late_initcall(kcsan_debugfs_init);
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
include/linux/init.h:292:46: note: expanded from macro 'late_initcall'
#define late_initcall(fn) __define_initcall(fn, 7)
Fixes: e36299efe7 ("kcsan, debugfs: Move debugfs file creation out of early init")
Cc: stable <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
On ARMv7, resource_size_t can be 64-bit, which breaks printing
it as %x:
drivers/edac/aspeed_edac.c: In function 'init_csrows':
drivers/edac/aspeed_edac.c:257:28: error: format '%x' expects argument of \
type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long \
long unsigned int'} [-Werror=format=]
257 | dev_dbg(mci->pdev, "dt: /memory node resources: first page \
r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
Use the special %pR format string to pretty-print the entire resource
instead.
Fixes: edfc2d73ca ("EDAC/aspeed: Add support for AST2400 and AST2600")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Turning on debugging in this this driver reveals a type mismatch:
In file included from include/linux/kernel.h:17,
from drivers/ata/sata_nv.c:23:
drivers/ata/sata_nv.c: In function 'nv_swncq_sdbfis':
drivers/ata/sata_nv.c:2121:10: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
2121 | DPRINTK("id 0x%x QC: qc_active 0x%x,"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......
2124 | ap->print_id, ap->qc_active, pp->qc_active,
| ~~~~~~~~~~~~~
| |
| u64 {aka long long unsigned int}
include/linux/printk.h:142:10: note: in definition of macro 'no_printk'
142 | printk(fmt, ##__VA_ARGS__); \
| ^~~
drivers/ata/sata_nv.c:2121:2: note: in expansion of macro 'DPRINTK'
2121 | DPRINTK("id 0x%x QC: qc_active 0x%x,"
| ^~~~~~~
drivers/ata/sata_nv.c:2121:36: note: format string is defined here
2121 | DPRINTK("id 0x%x QC: qc_active 0x%x,"
| ~^
| |
| unsigned int
| %llx
Use the correct format string for the u64 type.
Fixes: e3ed893964 ("libata: bump ->qc_active to a 64-bit type")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Printing an __iomem pointer as %x produces a warning:
drivers/ata/sata_fsl.c: In function 'fsl_sata_set_irq_coalescing':
drivers/ata/sata_fsl.c:316:17: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'void *' [-Werror=format=]
316 | DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
317 | hcr_base, ioread32(hcr_base + ICC));
| ~~~~~~~~
| |
| void *
It's not clear why that pointer should be printed here, but if we do,
then using %p is the way to avoid the warnings.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
AMD-TEE reference count loaded TAs
* tag 'amdtee-fixes-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: amdtee: unload TA only when its refcount becomes 0
Link: https://lore.kernel.org/r/20210505110850.GA3434209@jade
Signed-off-by: Arnd Bergmann <[email protected]>
The get_unaligned()/put_unaligned() implementations are much more complex
than necessary, now that all architectures use the same code.
Move everything into one file and use a much more compact way to express
the same logic.
I've compared the binary output using gcc-11 across defconfig builds for
all architectures and found this patch to make no difference, except for
a single function on powerpc that needs two additional register moves
because of random differences in register allocation.
There are a handful of callers of the low-level __get_unaligned_cpu32,
so leave that in place for the time being even though the common code
no longer uses it.
This adds a warning for any caller of get_unaligned()/put_unaligned()
that passes in a single-byte pointer, but I've sent patches for all
instances that show up in x86 and randconfig builds. It would be nice
to change the arguments of the endian-specific accessors to take the
matching __be16/__be32/__be64/__le16/__le32/__le64 arguments instead of
a void pointer, but that requires more changes to the rest of the kernel.
This new version does allow aggregate types into get_unaligned(), which
was not the original goal but might come in handy.
Signed-off-by: Arnd Bergmann <[email protected]>
With the cleaned up version of asm-generic/unaligned.h,
there is a warning about the get_user/put_user helpers using
unaligned access for single-byte variables:
include/asm-generic/uaccess.h: In function ‘__get_user_fn’:
include/asm-generic/unaligned.h:13:15: warning: ‘packed’ attribute ignored for field of type ‘u8’ {aka ‘unsigned char’} [-Wattributes]
const struct { type x __packed; } *__pptr = (typeof(__pptr))(ptr); \
Change these to use a direct pointer dereference to avoid the
warnings.
Signed-off-by: Arnd Bergmann <[email protected]>
With a planned cleanup, using put_unaligned() on a single character
results in a harmless warning:
In file included from ./arch/x86/include/generated/asm/unaligned.h:1,
from include/linux/etherdevice.h:24,
from net/core/netpoll.c:18:
net/core/netpoll.c: In function 'netpoll_send_udp':
include/asm-generic/unaligned.h:23:9: error: 'packed' attribute ignored for field of type 'unsigned char' [-Werror=attributes]
net/core/netpoll.c:431:3: note: in expansion of macro 'put_unaligned'
431 | put_unaligned(0x60, (unsigned char *)ip6h);
| ^~~~~~~~~~~~~
include/asm-generic/unaligned.h:23:9: error: 'packed' attribute ignored for field of type 'unsigned char' [-Werror=attributes]
net/core/netpoll.c:459:3: note: in expansion of macro 'put_unaligned'
459 | put_unaligned(0x45, (unsigned char *)iph);
| ^~~~~~~~~~~~~
Replace this with an open-coded pointer dereference.
Signed-off-by: Arnd Bergmann <[email protected]>
A patch from 2017 changed some accesses to DMA memory to use
get_unaligned_le32() and similar interfaces, to avoid problems
with doing unaligned accesson uncached memory.
However, the change in the mwifiex_pcie_alloc_sleep_cookie_buf()
function ended up changing the size of the access instead,
as it operates on a pointer to u8.
Change this function back to actually access the entire 32 bits.
Note that the pointer is aligned by definition because it came
from dma_alloc_coherent().
Fixes: 92c70a958b ("mwifiex: fix for unaligned reads")
Acked-by: Kalle Valo <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Using get_unaligned() on a u8 pointer is pointless, and will
result in a compiler warning after a planned cleanup:
In file included from arch/x86/include/generated/asm/unaligned.h:1,
from security/apparmor/policy_unpack.c:16:
security/apparmor/policy_unpack.c: In function 'unpack_u8':
include/asm-generic/unaligned.h:13:15: error: 'packed' attribute ignored for field of type 'u8' {aka 'unsigned char'} [-Werror=attributes]
13 | const struct { type x __packed; } *__pptr = (typeof(__pptr))(ptr); \
| ^
Simply dereference this pointer directly.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: John Johansen <[email protected]>
A simplification of get_unaligned() clashes with callers that pass
in a character pointer, causing a harmless warning like:
block/partitions/msdos.c: In function 'msdos_partition':
include/asm-generic/unaligned.h:13:22: warning: 'packed' attribute ignored for field of type 'u8' {aka 'unsigned char'} [-Wattributes]
Remove the SYS_IND() macro with the get_unaligned() call
and just use the ->ind field directly.
Signed-off-by: Arnd Bergmann <[email protected]>
As found by Vineet Gupta and Linus Torvalds, gcc has somewhat unexpected
behavior when faced with overlapping unaligned pointers. The kernel's
unaligned/access-ok.h header technically invokes undefined behavior
that happens to usually work on the architectures using it, but if the
compiler optimizes code based on the assumption that undefined behavior
doesn't happen, it can create output that actually causes data corruption.
A related problem was previously found on 32-bit ARMv7, where most
instructions can be used on unaligned data, but 64-bit ldrd/strd causes
an exception. The workaround was to always use the unaligned/le_struct.h
helper instead of unaligned/access-ok.h, in commit 1cce91dfc8 ("ARM:
8715/1: add a private asm/unaligned.h").
The same solution should work on all other architectures as well, so
remove the access-ok.h variant and use the other one unconditionally on
all architectures, picking either the big-endian or little-endian version.
With this, the arm specific header can be removed as well, and the
only file including linux/unaligned/access_ok.h gets moved to including
the normal file.
Fortunately, this made almost no difference to the object code produced
by gcc-11. On x86, s390, powerpc, and arc, the resulting binary appears
to be identical to the previous version, while on arm64 and m68k there
are minimal differences that looks like an optimization pass went into
a different direction, usually using fewer stack spills on the new
version.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
In theory, compilers should be able to work this out themselves so we
can use a simpler version based on the swab() helpers.
I have verified that this works on all supported compiler versions
(gcc-4.9 and up, clang-10 and up). Looking at the object code produced by
gcc-11, I found that the impact is mostly a change in inlining decisions
that lead to slightly larger code.
In other cases, this version produces explicit byte swaps in place of
separate byte access, or comparing against pre-swapped constants.
While the source code is clearly simpler, I have not seen an indication
of the new version actually producing better code on Arm, so maybe
we want to skip this after all. From what I can tell, gcc recognizes
the byteswap pattern in the byteshift.h header and can turn it into
explicit instructions, but it does not turn a __builtin_bswap32() back
into individual bytes when that would result in better output, e.g.
when storing a byte-reversed constant.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Little-endian POWER7 kernels disable
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS because that is not supported on
the hardware, but the kernel still uses direct load/store for explicti
get_unaligned()/put_unaligned().
I assume this is a mistake that leads to power7 having to trap and fix
up all these unaligned accesses at a noticeable performance cost.
The fix is completely trivial, just remove the file and use the
generic version that gets it right.
Signed-off-by: Arnd Bergmann <[email protected]>
All supported CPUs other than the old dragonball and in theory other 68000
derivatives use the include/linux/unaligned/access_ok.h implementation
for accessing unaligned variables, so presumably this works everywhere.
However, m68k never selects CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
so none of the other conditionals in the kernel get the optimized
implementation.
Select this based on CPU_HAS_NO_UNALIGNED to make the two settings
always match, and then use the generic version of the header.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Unlike every other architecture, sh4a uses an inline asm implementation
for get_unaligned(). I have shown that this produces better object
code than the asm-generic version. However, there are very few users of
arch/sh/ overall, and most of those seem to use sh4 rather than sh4a CPU
cores, so it seems not worth keeping the complexity in the architecture
independent code.
Change over to the generic version to allow simplifying that in a
follow-up patch.
If there are sh4a users that want the best performance, it would probably
be best to add support for the movua instruction in gcc itself, as this
would not just help get_unaligned() callers but any code that accesses
a __packed variable in user space or kernel.
Signed-off-by: Arnd Bergmann <[email protected]>
openrisc is the only architecture using the linux/unaligned/*memmove
infrastructure. There is a comment saying that this version is more
efficient, but this was added in 2011 before the openrisc gcc port
was merged upstream.
I checked a couple of files to see what the actual difference is with
the mainline gcc (9.4 and 11.1), and found that the generic header
seems to produce better code now, regardless of the gcc version.
Specifically, the be_memmove leads to allocating a stack slot and
copying the data one byte at a time, then reading the whole word
from the stack:
00000000 <test_get_unaligned_memmove>:
0: 9c 21 ff f4 l.addi r1,r1,-12
4: d4 01 10 04 l.sw 4(r1),r2
8: 8e 63 00 00 l.lbz r19,0(r3)
c: 9c 41 00 0c l.addi r2,r1,12
10: 8e 23 00 01 l.lbz r17,1(r3)
14: db e2 9f f4 l.sb -12(r2),r19
18: db e2 8f f5 l.sb -11(r2),r17
1c: 8e 63 00 02 l.lbz r19,2(r3)
20: 8e 23 00 03 l.lbz r17,3(r3)
24: d4 01 48 08 l.sw 8(r1),r9
28: db e2 9f f6 l.sb -10(r2),r19
2c: db e2 8f f7 l.sb -9(r2),r17
30: 85 62 ff f4 l.lwz r11,-12(r2)
34: 85 21 00 08 l.lwz r9,8(r1)
38: 84 41 00 04 l.lwz r2,4(r1)
3c: 44 00 48 00 l.jr r9
40: 9c 21 00 0c l.addi r1,r1,12
while the be_struct version reads each byte into a register
and does a shift to the right position:
00000000 <test_get_unaligned_struct>:
0: 9c 21 ff f8 l.addi r1,r1,-8
4: 8e 63 00 00 l.lbz r19,0(r3)
8: aa 20 00 18 l.ori r17,r0,0x18
c: e2 73 88 08 l.sll r19,r19,r17
10: 8d 63 00 01 l.lbz r11,1(r3)
14: aa 20 00 10 l.ori r17,r0,0x10
18: e1 6b 88 08 l.sll r11,r11,r17
1c: e1 6b 98 04 l.or r11,r11,r19
20: 8e 23 00 02 l.lbz r17,2(r3)
24: aa 60 00 08 l.ori r19,r0,0x8
28: e2 31 98 08 l.sll r17,r17,r19
2c: d4 01 10 00 l.sw 0(r1),r2
30: d4 01 48 04 l.sw 4(r1),r9
34: 9c 41 00 08 l.addi r2,r1,8
38: e2 31 58 04 l.or r17,r17,r11
3c: 8d 63 00 03 l.lbz r11,3(r3)
40: e1 6b 88 04 l.or r11,r11,r17
44: 84 41 00 00 l.lwz r2,0(r1)
48: 85 21 00 04 l.lwz r9,4(r1)
4c: 44 00 48 00 l.jr r9
50: 9c 21 00 08 l.addi r1,r1,8
According to Stafford Horne, the new version should in fact perform
better.
In the trivial example, the struct version is a few instructions longer,
but building a whole kernel shows an overall reduction in code size,
presumably because it now has to manage fewer stack slots:
text data bss dec hex filename
4792010 181480 82324 5055814 4d2546 vmlinux-unaligned-memmove
4790642 181480 82324 5054446 4d1fee vmlinux-unaligned-struct
Remove the memmove version completely and let openrisc use the same
code as everyone else, as a simplification.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Stafford Horne <[email protected]>
There are several architectures that just duplicate the contents
of asm-generic/unaligned.h, so change those over to use the
file directly, to make future modifications easier.
The exceptions are:
- arm32 sets HAVE_EFFICIENT_UNALIGNED_ACCESS, but wants the
unaligned-struct version
- ppc64le disables HAVE_EFFICIENT_UNALIGNED_ACCESS but includes
the access-ok version
- most m68k also uses the access-ok version without setting
HAVE_EFFICIENT_UNALIGNED_ACCESS.
- sh4a has a custom inline asm version
- openrisc is the only one using the memmove version that
generally leads to worse code.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
gcc gets confused by some of the type casts and produces an
apparently senseless warning about an out-of-bound memcpy to
an unrelated array in the same structure:
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function 'rtw_cfg80211_ap_set_encryption':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from drivers/staging/rtl8723bs/include/drv_types.h:32,
from drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:10:
drivers/staging/rtl8723bs/include/rtw_security.h:98:15: note: at offset [184, 4264] into destination object 'dot11AuthAlgrthm' of size 4
98 | u32 dot11AuthAlgrthm; /* 802.11 auth, could be open, shared, 8021x and authswitch */
| ^~~~~~~~~~~~~~~~
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
drivers/staging/rtl8723bs/include/rtw_security.h:98:15: note: at offset [264, 4344] into destination object 'dot11AuthAlgrthm' of size 4
This is a known gcc bug, and the patch here is only a workaround,
but the approach of using a temporary variable to hold a pointer
to the key also improves readability in addition to avoiding the
warning, so overall this should still help.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99673
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
As of commit 966a967116 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe0320 ("block: unalign
call_single_data in struct request").
The result is a violation of the calling conventions that clang correctly
points out:
block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
smp_call_function_single_async(cpu, &rq->csd);
It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Jens Axboe <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
ARM SCMI fixes for v5.13
A fix for very old possible ternary operation sign extention bug in the old
ARM SCPI firmware driver and a cleanup to remove duplicate structure declartion
in SCMI driver.
* tag 'scmi-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
Link: https://lore.kernel.org/r/20210428093148.flrcowzr2dsj7byz@bogus
Signed-off-by: Arnd Bergmann <[email protected]>
The same patch was accidentally merged twice, resulting in a
duplicate line for the mt8192 SoC.
Fixes: f2674c0c74 ("dt-bindings: nvmem: mediatek: add support for MediaTek mt8192 SoC")
Fixes: 2a1405a14c ("dt-bindings: nvmem: mediatek: add support for MediaTek mt8192 SoC")
Signed-off-by: Arnd Bergmann <[email protected]>
In some configurations, the sock_cgroup_ptr() function is not available:
net/netfilter/nft_socket.c: In function 'nft_sock_get_eval_cgroupv2':
net/netfilter/nft_socket.c:47:16: error: implicit declaration of function 'sock_cgroup_ptr'; did you mean 'obj_cgroup_put'? [-Werror=implicit-function-declaration]
47 | cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
| ^~~~~~~~~~~~~~~
| obj_cgroup_put
net/netfilter/nft_socket.c:47:14: error: assignment to 'struct cgroup *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
47 | cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
| ^
Change the caller to match the same #ifdef check, only calling it
when the function is defined.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
The variable is only used in an #ifdef, causing a harmless warning:
net/netfilter/nft_socket.c: In function 'nft_socket_init':
net/netfilter/nft_socket.c:137:27: error: unused variable 'level' [-Werror=unused-variable]
137 | unsigned int len, level;
| ^~~~~
Move it into the same #ifdef block.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
The Kconfig dependency is incomplete since DRM_I915_GVT is a 'bool'
symbol that depends on the 'tristate' VFIO_MDEV. This allows a
configuration with VFIO_MDEV=m, DRM_I915_GVT=y and DRM_I915=y that
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `available_instances_show':
gvt.c:(.text+0x67a): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x6a5): undefined reference to `mtype_get_type_group_id'
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `description_show':
gvt.c:(.text+0x76e): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x799): undefined reference to `mtype_get_type_group_id'
Clarify the dependency by specifically disallowing the broken
configuration. If VFIO_MDEV is built-in, it will work, but if
VFIO_MDEV=m, the i915 driver cannot be built-in here.
Fixes: 07e543f4f9 ("vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV")
Fixes: 9169cff168 ("vfio/mdev: Correct the function signatures for the mdev_type_attributes")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Zhenyu Wang <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
A minor cleanup to address a clang warning removed an assigned
but unused local variable, but this now caused a gcc warning as
kfifo_out() is annotated to require checking its return code:
In file included from drivers/memstick/host/r592.h:13,
from drivers/memstick/host/r592.c:21:
drivers/memstick/host/r592.c: In function 'r592_flush_fifo_write':
include/linux/kfifo.h:588:1: error: ignoring return value of '__kfifo_uint_must_check_helper' declared with attribute 'warn_unused_result' [-Werror=unused-result]
588 | __kfifo_uint_must_check_helper( \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
589 | ({ \
| ~~~~
590 | typeof((fifo) + 1) __tmp = (fifo); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
591 | typeof(__tmp->ptr) __buf = (buf); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
592 | unsigned long __n = (n); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
593 | const size_t __recsize = sizeof(*__tmp->rectype); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
594 | struct __kfifo *__kfifo = &__tmp->kfifo; \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
595 | (__recsize) ?\
| ~~~~~~~~~~~~~~
596 | __kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
597 | __kfifo_out(__kfifo, __buf, __n); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
598 | }) \
| ~~~~
599 | )
| ~
drivers/memstick/host/r592.c:367:9: note: in expansion of macro 'kfifo_out'
367 | kfifo_out(&dev->pio_fifo, buffer, 4);
| ^~~~~~~~~
The value was never checked here, and the purpose of the function
is only to flush the contents, so restore the old behavior but
add a cast to void and a comment, which hopefully warns with neither
gcc nor clang now.
If anyone has an idea for how to fix it without ignoring the return
code, that is probably better.
Fixes: 4b00ed3c50 ("memstick: r592: remove unused variable")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
arm64: tegra: Device tree fixes for v5.12-rc6
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
* tegra/dt64:
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
There are a few warnings about empty debug macros in this driver:
drivers/net/ethernet/neterion/vxge/vxge-main.c: In function 'vxge_probe':
drivers/net/ethernet/neterion/vxge/vxge-main.c:4480:76: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
4480 | "Failed in enabling SRIOV mode: %d\n", ret);
Change them to proper 'do { } while (0)' expressions to make the
code a little more robust and avoid the warnings.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
A link time bug that I had fixed before has come back now that
another sub-module was added to the enetc driver:
ERROR: modpost: "enetc_ierb_register_pf" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined!
The problem is that the enetc Makefile is not actually used for
the ierb module if that is the only built-in driver in there
and everything else is a loadable module.
Fix it by always entering the directory this time, regardless
of which symbols are configured. This should reliably fix the
problem and prevent it from coming back another time.
Fixes: 112463ddbe ("net: dsa: felix: fix link error")
Fixes: e7d48e5fbf ("net: enetc: add a mini driver for the Integrated Endpoint Register Block")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The MANA driver causes a build failure in some configurations when
it selects an unavailable symbol:
WARNING: unmet direct dependencies detected for PCI_HYPERV
Depends on [n]: PCI [=y] && X86_64 [=y] && HYPERV [=n] && PCI_MSI [=y] && PCI_MSI_IRQ_DOMAIN [=y] && SYSFS [=y]
Selected by [y]:
- MICROSOFT_MANA [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROSOFT [=y] && PCI_MSI [=y] && X86_64 [=y]
drivers/pci/controller/pci-hyperv.c: In function 'hv_irq_unmask':
drivers/pci/controller/pci-hyperv.c:1217:9: error: implicit declaration of function 'hv_set_msi_entry_from_desc' [-Werror=implicit-function-declaration]
1217 | hv_set_msi_entry_from_desc(¶ms->int_entry.msi_entry, msi_desc);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
A PCI driver should never depend on a particular host bridge
implementation in the first place, but if we have this dependency
it's better to express it as a 'depends on' rather than 'select'.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Dexuan Cui <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Printing size_t needs a special %zx format modifier to avoid a
warning like:
drivers/spi/spi-stm32-qspi.c:481:41: note: format string is defined here
481 | dev_dbg(qspi->dev, "%s len = 0x%x offs = 0x%llx buf = 0x%p\n", __func__, len, offs, buf);
Patrice already tried to fix this, but picked %lx instead of %zx,
which fixed some architectures but broke others in the same way.
Using %zx works everywhere.
Fixes: 18674dee3c ("spi: stm32-qspi: Add dirmap support")
Fixes: 1b8a7d4282 ("spi: stm32-qspi: Fix compilation warning in ARM64")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
A reorganization of the driver source led to two of them causing
a compile time warning in some configurations:
tegra/tegra20_spdif.c:36:12: error: 'tegra20_spdif_runtime_resume' defined but not used [-Werror=unused-function]
36 | static int tegra20_spdif_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra20_spdif.c:27:12: error: 'tegra20_spdif_runtime_suspend' defined but not used [-Werror=unused-function]
27 | static int tegra20_spdif_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:64:12: error: 'tegra30_ahub_runtime_resume' defined but not used [-Werror=unused-function]
64 | static int tegra30_ahub_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:43:12: error: 'tegra30_ahub_runtime_suspend' defined but not used [-Werror=unused-function]
43 | static int tegra30_ahub_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: b5571449e6 ("ASoC: tegra30: ahub: Remove handing of disabled runtime PM")
Fixes: c53b396f0d ("ASoC: tegra20: spdif: Remove handing of disabled runtime PM")
Fixes: 80ec4a4cb3 ("ASoC: tegra20: i2s: Remove handing of disabled runtime PM")
Fixes: b5f6f781fc ("ASoC: tegra30: i2s: Remove handing of disabled runtime PM")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Printing a 'long' variable using the '%d' format string is wrong
and causes a warning from gcc:
kernel/kcsan/kcsan_test.c: In function 'nthreads_gen_params':
include/linux/kern_levels.h:5:25: error: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Werror=format=]
Use the appropriate format modifier.
Fixes: f6a1491403 ("kcsan: Switch to KUNIT_CASE_PARAM for parameterized tests")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
The driver now fails to build without ACPI:
drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs':
drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device'
617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0,
This could probably be made optional, but it won't be used without
ACPI in practice, so just add a Kconfig dependency.
Fixes: 428131364f ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
BMC device tree updates for 5.13, round two
- Fixes to the first pull request for Rainier
- Small changes for Rainier, EthanolX and Tiogapass
* tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: tiogapass: add hotplug controller
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
Link: https://lore.kernel.org/r/CACPK8XeJdHmxyJn43Ju5hmxJ7+rJgHmx=ANFaL17YUmp+gOtJg@mail.gmail.com
Signed-off-by: Arnd Bergmann <[email protected]>
Qualcomm ARM defconfig updates for 5.13
This enables all the hardware support currently available for the
Qualcomm SDX55 platform in the qcom_defconfig. Due to (current) size
limitations these changes are not done in the multi-platform config.
* tag 'qcom-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Even more Qualcomm ARM64 updates for v5.13
This contains three audio related fixes for the sc7180 Trogdor devices.
* tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
gcc complains that the ctl->max_chunk_size member might be used
uninitialized when none of the three conditions for initializing it in
init_alloc_chunk_ctl_policy_zoned() are true:
In function ‘init_alloc_chunk_ctl_policy_zoned’,
inlined from ‘init_alloc_chunk_ctl’ at fs/btrfs/volumes.c:5023:3,
inlined from ‘btrfs_alloc_chunk’ at fs/btrfs/volumes.c:5340:2:
include/linux/compiler-gcc.h:48:45: error: ‘ctl.max_chunk_size’ may be used uninitialized [-Werror=maybe-uninitialized]
4998 | ctl->max_chunk_size = min(limit, ctl->max_chunk_size);
| ^~~
fs/btrfs/volumes.c: In function ‘btrfs_alloc_chunk’:
fs/btrfs/volumes.c:5316:32: note: ‘ctl’ declared here
5316 | struct alloc_chunk_ctl ctl;
| ^~~
If we ever get into this condition, something is seriously
wrong, as validity is checked in the callers
btrfs_alloc_chunk
init_alloc_chunk_ctl
init_alloc_chunk_ctl_policy_zoned
so the same logic as in init_alloc_chunk_ctl_policy_regular()
and a few other places should be applied. This avoids both further
data corruption, and the compile-time warning.
Fixes: 1cd6121f2a ("btrfs: zoned: implement zoned chunk allocator")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
gcc-11 with KASAN on 32-bit arm produces a warning about a function
that needs a lot of stack space:
drivers/net/wireless/cisco/airo.c: In function 'setup_card.constprop':
drivers/net/wireless/cisco/airo.c:3960:1: error: the frame size of 1512 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]
Most of this is from a single large structure that could be dynamically
allocated or moved into the per-device structure. However, as the callers
all seem to have a fairly well bounded call chain, the easiest change
is to pull out the part of the function that needs the large variables
into a separate function and mark that as noinline_for_stack. This does
not reduce the total stack usage, but it gets rid of the warning and
requires minimal changes otherwise.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Arnd Bergmann