This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.
Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Paul Walmsley <[email protected]>
A recent addition exposed a helper that is only used for CONFIG_OF. Move
it into the CONFIG_OF zone in this file to make the compiler stop
warning about an unused function.
Fixes: 66d9506440 ("clk: walk orphan list on clock provider registration")
Signed-off-by: Olof Johansson <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: "Simply" move the function instead]
Signed-off-by: Stephen Boyd <[email protected]>
This pull request contains Broadcom ARM-based SoCs machine fixes for
5.5-rc1, please pull the following:
- H. Nikolaus adds a missing sentinel entry to the BCM2711 machine
descriptor compatible array which would make multiplatform kernels fail
to boot
* tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm: Add missing sentinel to bcm2711_compat[]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Samsung fixes for v5.5
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
* tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Restore debugfs support
MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry
MAINTAINERS: Update Lukasz Luba's email address
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Renesas fixes for v5.5
- Restore debugfs support
* tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Fixes for omap variants for v5.5-rc1 cycle
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
* tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing reset delay handling
ARM: dts: am437x-gp/epos-evm: fix panel compatible
ARM: omap2plus_defconfig: Add back DEBUG_FS
ARM: omap2plus_defconfig: enable NET_SWITCHDEV
ARM: dts: am335x-sancloud-bbe: fix phy mode
bus: ti-sysc: Fix missing force mstandby quirk handling
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX fixes for 5.5:
- Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board,
so that SPI NOR device can be probed.
- Fix power button of E60K02 board by removing LDORTC2 regulator.
- A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to
remove the boot regression caused by 8267ff89b7 ("ARM: imx: Add
serial number support for i.MX6/7 SoCs").
- A couple of fixes on LS1028A SoC TMU regarding to calibration data
and reboot register configuration.
- Fix a regression seen on imx6ul-evk board by marking always-on for
the regulator that is shared by many peripherals.
- Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig.
* tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Fix boot crash if ocotp is not found
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: dts: imx6ul-evk: Fix peripheral regulator
arm64: dts: ls1028a: fix reboot node
arm64: dts: ls1028a: fix typo in TMU calibration data
ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
ARM: dts: e60k02: fix power button
ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing
Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon
Signed-off-by: Olof Johansson <[email protected]>
Reset controller fixes for v5.5, part 2
Fix the example in the brcmstb-reset device tree bindings, remove a bogus
resource alignment check from the reset-brcmstb driver, fix the documented
return value type for the reset_control_array_get functions, and fix a
devres memory leak when requesting optional, not present reset controls.
* tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux:
reset: Do not register resource data for missing resets
reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
reset: brcmstb: Remove resource checks
dt-bindings: reset: Fix brcmstb-reset example
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
v5.5-rc1, please pull the following:
- Nicolas fixes the SoC's dma-range property to cover the full 1GB
aperture
- Stefan fixes the critical temperature trip point to be set before the
firmware performs thermal throttling
- Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected
#address-cells and #size-cells properties
* tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix critical trip point
ARM: dts: Cygnus: Fix MDIO node address/size cells
ARM: dts: bcm2711: fix soc's node dma-ranges
ARM: dts: BCM5301X: Fix MDIO node address/size cells
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARMv7 Vexpress fixes for v5.5
Switching the cpumask from topology core to OPP sharing, as the topology
core cpumask can be modified during cpu hotplug to avoid setting up
wrong cpufreq policy cpumask.
* tag 'vexpress-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cpufreq: vexpress-spc: Switch cpumask from topology core to OPP sharing
ARM: vexpress: Set-up shared OPP table instead of individual for each CPU
Link: https://lore.kernel.org/r/20191209140037.GC25155@bogus
Signed-off-by: Olof Johansson <[email protected]>
The Makefile addition for the flat image loader missed an obj prefix.
For most parallel builds this worked out fine, but with -j1 the dependency
wasn't fulfilled and thus fails:
arch/riscv/boot/loader.S: Assembler messages:
arch/riscv/boot/loader.S:7: Error: file not found: arch/riscv/boot/Image
Fixes: 405fe7aa0d ("riscv: provide a flat image loader")
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Paul Walmsley <[email protected]>
The loop optimizer seems to go astray here, and produces some warnings
that don't seem valid.
Still, the code can be simplified -- just clear the whole array at the
beginning, and fill in whatever values are valid on the platform.
Warnings before this change (GCC 8.2.0 ARM allmodconfig):
In file included from ../sound/pci/echoaudio/gina24.c:115:
../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get':
../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]
In file included from ../sound/pci/echoaudio/layla24.c:112:
../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get':
../sound/pci/echoaudio/echoaudio_dsp.c:658:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]
../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]
Signed-off-by: Olof Johansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
This pull request contains the second batch of changes for Broadcom
ARM-based SoCs, please pull the following:
- Nicolas declares a CMA area within the first 1GB of DRAM in order for
it to be guaranteed to reside there, otherwise ARM64's memory
initialization will pick up a CMA area within ZONE_DMA32
- Stefan adds the Device Tree node for the built-in Ethernet controller
(GENET) on the Raspberry Pi 4 model B board
* tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-4: Enable GENET support
ARM: dts: bcm2711: force CMA into first GB of memory
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
memory: tegra: Fixes for v5.5-rc1
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
* tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Fix panic on suspend
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
soc/tegra: Fixes for v5.5-rc1
Fixes a regression for wake events on Tegra194 caused by the Tegra210
support that was added in v5.5-rc1 as well as wrong reset sources and
levels on Tegra194.
* tag 'tegra-for-5.5-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add reset sources and levels on Tegra194
soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
soc/tegra: pmc: Use lower-case for hexadecimal literals
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
cpufreq: tegra: Changes for v5.5-rc1
Implements support for suspend/resume on Tegra124.
* tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: tegra124: Add suspend and resume support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
SoCFPGA updates for v5.5
- Issue COLD reboot by default for SoCFPGA platforms
* tag 'socfpga_update_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm: socfpga: execute cold reboot by default
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Device tree fixes for omap variants for for v5.5 merge window
This series of changes contains fixes for few SoC and board specific
issues that would be good to have merged for v5.5-rc1:
- Fix incorrect MMC card detection polarity for omap3-tao3530
- Fix wrong am57xx-beagle-x15 pinmux named states for eMMC
- Fix dra7 cpsw mdio clock that causes wrong speed
- Fix vcsi for droid4 so it won't get turned off after init
- Fix rev and sysconfig register offsets for omap4 sgx so it can idle
Then there are also two minor late changes to logicpd-torpedo-baseboard
to configure 1-wire HDQ for battery stats, and remove out of date
workaround comments no longer needed.
* tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix sgx sysconfig register for omap4
ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
ARM: dts: dra7: fix cpsw mdio fck clock
ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments
ARM: dts: logicpd-torpedo-baseboard: Enable HDQ
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Few ti-sysc related fixes for v5.5 merge window
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
ARM: OMAP2+: Drop useless gptimer option for omap4
bus: ti-sysc: Add module enable quirk for audio AESS
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <[email protected]>
ARM SCMI fix for v5.5
Yet another single fix to avoid double freeing in scmi_device_create
error path
* tag 'scmi-fix-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Avoid double free in error flow
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
Link: https://lore.kernel.org/r/20191202114559.GB20965@bogus
Signed-off-by: Olof Johansson <[email protected]>
ARMv8 Juno fixes for v5.5
Couple of fixes:
1. Fix for UART clock frequency on all Juno variants that exist since
the platform was added. This is mainly due to incorrect Juno SoC
TRM that was referred during initial development days
2. Drop "dma-ranges" property for now as they are triggering loads of
warning on boot
* tag 'juno-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
Revert "arm64: dts: juno: add dma-ranges property"
arm64: dts: juno: Fix UART frequency
arm64: dts: juno: add GPU subsystem
Link: https://lore.kernel.org/r/20191202114338.GA20965@bogus
Signed-off-by: Olof Johansson <[email protected]>
This pull request contains MAINTAINERS file updates for Broadcom SoCs,
please pull the following:
- Stefan and Eric step down from doing BCM283x maintenance and Nicolas
replaces them both moving forward
* tag 'arm-soc/for-5.5/maintainers-part2' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Two OP-TE driver fixes:
- Add proper cleanup on optee_enumerate_devices() failure
- Make sure to register kernel allocations of dynamic shared memory
* tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee: (591 commits)
tee: optee: fix device enumeration error handling
tee: optee: Fix dynamic shm pool allocations
Linux 5.4-rc3
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
...
Link: https://lore.kernel.org/r/20191115105353.GA26176@jax
Signed-off-by: Olof Johansson <[email protected]>
ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <[email protected]>
ARM SCMI fix for v5.5
Just a single fix to correct the SCMI fast channel doorbell ring logic
when CONFIG_64BIT is not set.
* tag 'scmi-fix-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
Link: https://lore.kernel.org/r/20191114164555.GA19398@bogus
Signed-off-by: Olof Johansson <[email protected]>
Commit c33fbe8f67 ("ext4: Enable blocksize < pagesize for
dioread_nolock") removed the only user of 'sbi' outside of the ifdef,
so it caused a new warning:
fs/ext4/super.c:2068:23: warning: unused variable 'sbi' [-Wunused-variable]
Fixes: c33fbe8f67 ("ext4: Enable blocksize < pagesize for dioread_nolock")
Signed-off-by: Olof Johansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
NXP/FSL SoC driver updates for v5.5
RCPM driver for ARM SoCs
- add RCPM driver to manage the wakeup devices for QorIQ ARM SoCs (HW low
power states are supported in PSCI firmware)
- add API to PM wakeup framework to retrieve wakeup sources
* tag 'soc-fsl-next-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
PM: wakeup: Add routine to help fetch wakeup source object.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Update MAINTAINERS file for LogicPD dts files
Just one patch to update MAINTAINERS file for LogicPD boards.
* tag 'omap-for-v5.5/maintainers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Few late SoC changes for v5.5 merge window
These changes just clean up few typos, and there is one non-critical
correction of missing put_device() after calling of_platform_populate()
for display controller.
Naturally none of this is urgent and can be merged when suitable.
* tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
OMAP2: fixup doc comments in omap_device
ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Few late dts changes for omaps for v5.5 merge window
Let's configure omap3 rng as we can now easily do it with a dts change
only by tagging it with status = "disabled" for n900 where it's not
accessible. This improves the boot-up time with distros quite a bit with
proper entropy source around.
There's also another minor update for logicpd-torpedo that does not have
USB host pins wired.
* tag 'omap-for-v5.5/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-torpedo: Disable USB Host
ARM: dts: Configure omap3 rng
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
memory: tegra: Changes for v5.5-rc1
This contains a couple of fixes and adds support for EMC frequency
scaling on Tegra30.
* tag 'tegra-for-5.5-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
clk: tegra: Add Tegra20/30 EMC clock implementation
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM64: hisi: SoC driver updates for 5.5
- check the LOGIC_PIO_INDIRECT region ops at registration instead of
in the IO port accessors to optimise the lib/ligic_pio.c
- add the hisi LPC driver to the build test for the other architectures
except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb
by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE
- clean the sparse complains of the hisi LPC driver
- build logic_pio into a lib to avoid including in the vmlinux when not
referenced
* tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi:
logic_pio: Build into a library
bus: hisi_lpc: Expand build test coverage
bus: hisi_lpc: Clean some types
logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO
lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
One new soc the rk3308 with quad-Cortex-A35 cores.
New boards are Beelink A1, roc-rk3308-cc, rk3308-evb
A big number of improvements for the rk3399-roc-pc board
(support for M.2 variant, reworked power-tree, buttons, leds)
and further improvements of the px30-evb (usb2phy, otp controller,
removal of default optee node - optee does add its own when loaded)
And finally rk3328 audio support, sdmmc detection fix and enabled
of the gpu on rk3399-puma.
* tag 'v5.5-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc
arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.
arm64: dts: rockchip: Add Beelink A1
dt-bindings: ARM: rockchip: Add Beelink A1
arm64: dts: rockchip: Add RK3328 audio pipelines
arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc
dt-bindings: Add doc for Firefly ROC-RK3308-CC board
dt-bindings: clean up rockchip grf binding document
arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pc
arm64: dts: rockchip: Add vcc_sys enable pin on rk3399-roc-pc
arm64: dts: rockchip: Add nodes for buttons on rk3399-roc-pc
arm64: dts: rockchip: enable usb2phy on px30-evb
arm64: dts: rockchip: add usb2phy for px30
arm64: dts: rockchip: remove px30 default optee node
arm64: dts: rockchip: enable gpu on rk3399-puma
arm64: dts: rockchip: add px30 otp controller
arm64: dts: rockchip: Add LED nodes on rk3399-roc-pc
arm64: dts: rockchip: Add basic dts for RK3308 EVB
dt-bindings: Add doc for rk3308-evb
arm64: dts: rockchip: Add core dts for RK3308 SOC
...
Link: https://lore.kernel.org/r/12204771.K8DX0fml49@phil
Signed-off-by: Olof Johansson <[email protected]>
HDMI-audio support for Veyron devices.
* tag 'v5.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add HDMI audio support to rk3288-veyron-mickey
ARM: dts: rockchip: Add HDMI support to rk3288-veyron-analog-audio
Link: https://lore.kernel.org/r/1926436.N9mSsAMzn9@phil
Signed-off-by: Olof Johansson <[email protected]>
soc: amlogic: updates for v5.5
Highlights
- socinfo: more SoC IDs
- firmware: misc secure-monitor cleanups
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-gx-socinfo: Fix S905D3 ID for VIM3L
soc: amlogic: meson-gx-socinfo: Add S905X3 ID for VIM3L
soc: amlogic: meson-gx-socinfo: Add A1 and A113L IDs
firmware: meson_sm: use %*ph to print small buffer
firmware: meson_sm: Rework driver as a proper platform driver
nvmem: meson-efuse: bindings: Add secure-monitor phandle
firmware: meson_sm: Mark chip struct as static const
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
AT91 defconfig for 5.5
- Unselect PIT now that the TCBs can be used at boot time
* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: unselect PIT
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
AT91 DT for 5.5
- New Overkiz Kizbox3 board
- Rework of the other Kizbox device trees
- New filters for i2c on sama5d4 and sama5d2
* tag 'at91-5.5-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
dt-bindings: arm: at91: Document Kizbox2-2 board binding
ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
ARM: dts: at91: sama5d2_xplained: add analog and digital filter for i2c
ARM: dts: at91: add Overkiz KIZBOX3 board
dt-bindings: arm: at91: Document Kizbox3 HS board binding
dt-bindings: Add vendor prefix for Overkiz SAS
ARM: dts: at91: sama5d2: add an rtc label for derived boards
ARM: dts: at91: sama5d27_som1_ek: add mmc capabilities for SDMMC0
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
AT91 drivers for 5.5
- a new driver exposing the serial number registers through nvmem
- a few documentation and definition changes
* tag 'at91-5.5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
ARM: at91: Documentation: update the sama5d3 and armv7m datasheets
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ASPEED device tree updates for 5.5
- Lots of work on the AST2600 boards as bringup continues. There's the
eval board, and two IBM boards called Tacoma and Rainier
- A new flash layout for OpenBMC systems with larger flashes
- Better support for the MAC clocking when talking to a NCSI device,
making Linux less reliant on u-boot having done the correct thing
- LED fixes for vesin and fp5280g2
- SGPIO support
- Facebook network BMC cleanup with the common hardware moved to a
shared dtsi
* tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (48 commits)
ARM: dts: aspeed-g6: Add timer description
ARM: dts: aspeed: ast2600evb: Enable i2c buses
ARM: dts: aspeed-g5: Add SGPIO description
ARM: dts: aspeed: yamp: Use common dtsi
ARM: dts: aspeed: minipack: Use common dtsi
ARM: dts: aspeed: cmm: Use common dtsi
ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs
ARM: dts: aspeed: rainier: gpio-keys for PSU presence
ARM: dts: aspeed: rainier: Fix i2c eeprom size
ARM: dts: tacoma: Hog LPC pinmux
ARM: dts: aspeed: rainier: Enable VUART1
ARM: dts: aspeed: rainier: Add i2c eeproms
ARM: dts: aspeed: tacoma: Use 64MB for firmware memory
ARM: dts: aspeed: tacoma: Add host FSI description
ARM: dts: ast2600evb: Enable UART workaround
ARM: dts: aspeed: tacoma: Add UART1 and workaround
ARM: dts: aspeed-g6: Add remaining UARTs
ARM: dts: aspeed-g6: Fix i2c clock source
ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces
ARM: dts: aspeed: tacoma: Enable FMC and SPI devices
...
Link: https://lore.kernel.org/r/CACPK8Xe8XiJ+oEp3_AXO5Mox-mXWVrOJKQLJMKJxg1WdYCTzMw@mail.gmail.com
Signed-off-by: Olof Johansson <[email protected]>
arm64: soc: Xilinx SoC changes for v5.5
- Extend firmware interface to cover Versal chip
* tag 'zynqmp-soc-for-v5.5' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Add support for versal soc
dt-bindings: firmware: Add bindings for Versal firmware
soc: xilinx: Set CAP_UNUSABLE requirement for versal while powering down domain
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
arm64: dts: zynqmp: DT changes for v5.5
- Add firmware node with fpga and nvmem support
* tag 'zynqmp-dt-for-v5.5' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add support for zynqmp nvmem firmware driver
arm64: zynqmp: Label whole PL part as fpga_full region
arm64: zynqmp: Add support for zynqmp fpga manager
arm64: zynqmp: Add firmware DT node
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Qualcomm ARM Based defconfig Updates for v5.5
* Enable OCMEM support
* tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add ocmem support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Qualcomm ARM64 Updates for v5.5
* Add thermal IRQ support on MSM8916, SDM845, MSM8996, and QCS404
* Fix thermal HW ids for cpus on MSM8916
* Add blsp1 UART3 and blsp1 BAM on MSM8998
* Add volume buttons and WCNSS for Wifi and BT on MSM8916 LongCheer-l8150
* Fixup load on l21 for SD on apq8096-db820c
* Enable LVS1/2, APSS watchdog, and select UFS reset gpio for SDM845
* Disable coresight by default on MSM8998
* Enable bluetooth and remove retention idle state on MSM8998-clamshell
* Enable adsp, cdsp, and mpss on C630
* Enable bluetooth on MSM8998-mtp
* Delete zap shader on SDM845-cheza
* Add tactile buttons and hall sensor on MSM8916-Samsung-A2015
* Add Interconnect nodes, watchdog, and sleep clk on QCS404
* Override Iris compatible on MSM8916-Samsung-A5U
* Enable WCNSS Wifi and bluetooth on MSM8916-Samsung-A2015
* Fixup cooling states for the aoss warming devices
* tag 'qcom-arm64-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits)
arm64: dts: qcom: db845c: Enable LVS 1 and 2
arm64: dts: qcom: msm8998: Disable coresight by default
arm64: dts: qcom: msm8998-clamshell: Remove retention idle state
arm64: dts: qcom: sdm845-cheza: delete zap-shader
arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
arm64: dts: sdm845: thermal: Add interrupt support
arm64: dts: msm8996: thermal: Add interrupt support
arm64: dts: msm8998: thermal: Add interrupt support
arm64: dts: qcs404: thermal: Add interrupt support
arm64: dts: qcom: sdm845: Add APSS watchdog node
arm64: dts: qcom: c630: Enable adsp, cdsp and mpss
arm64: dts: qcom: msm8998-clamshell: Enable bluetooth
arm64: dts: qcom: msm8998-mtp: Enable bluetooth
arm64: dts: qcom: msm8998: Add blsp1_uart3
arm64: dts: qcom: msm8998: Add blsp1 BAM
arm64: dts: msm8916-longcheer-l8150: Add Volume buttons
arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT
soc: qcom: Invert the cooling states for the aoss warming devices
arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD
arm64: dts: msm8916-samsung-a2015: add tactile buttons and hall sensor
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX arm64 device tree changes for 5.5:
- Add the initial support for a new arm64 family SoC from NXP:
S32V234 ("Treerunner") vision microprocessors which are targeted for
high-performance, computationally intensive vision and sensor fusion
applications that require automotive safety levels.
- New board support: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri and
S32V234 EVB.
- A series of patch from Andrey Smirnov to improve zii-ultra support by
fixing regulator and adding accelerometer, switch watchdog.
- Add system counter device and enable cpuidle support for i.MX8MN.
- Move usdhc clocks assignment from SoC to board level DTS for
i.MX8 based boards.
- Add PCA6416 on I2C3 bus for imx8mm-evk, and enable SCU key for
imx8qxp-mek board.
- Enable GPU passive throttling on i.MX8MQ SoC, and add DDR PMU device
for i.MX8MN.
- A series from Fabio Estevam to fix DTC W=1 warnings for LS1028A device.
- Update the clock providers for the Mali DP500 and '#clock-cells' of
DPCLK node for LS1028A SoC.
- Misc small updates on various boards.
* tag 'imx-dt64-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
arm64: dts: imx8mn-evk: Remove invalid Atheros properties
arm64: dts: freescale: add initial support for colibri imx8x
arm64: dts: ls1028a: Fix tmu unit address
arm64: dts: ls1028a: Move thermal-zone out of SoC
arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mn: Remove duplicated machine compatible
arm64: dts: imx8mm: Remove duplicated machine compatible
arm64: dts: imx8mq-evk: Add remote control
arm64: dts: imx8mn: Add LPDDR4 EVK board support
arm64: dts: imx8mn: Create EVK dtsi file for common use
arm64: dts: imx8mn: Move usdhc clocks assignment to board DT
arm64: dts: imx8mm: Move usdhc clocks assignment to board DT
arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT
arm64: dts: fsl: Add device tree for S32V234-EVB
arm64: dts: imx8mm-evk: Assigned clocks for audio plls
arm64: dts: zii-ultra: Add node for switch watchdog
arm64: dts: zii-ultra: Add node for accelerometer
arm64: dts: zii-ultra: Fix regulator-3p3-main's name
arm64: dts: zii-ultra: Fix regulator-vsd-3v3's vin-supply
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX device tree changes for 5.5:
- New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311
and N6411, OPOS6UL and OPOS6ULDev.
- Correct speed grading fuse settings and add opp-suspend property for
i.MX7D device tree.
- Move usdhc clocks assignment from SoC to board level DTS for imx7ulp,
and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board.
- Add missing cooling device properties for CPUs for i.MX6/7 SoCs.
- Add sensor GPIO regulator and assign power supplies for magnetometer
for imx6ul-14x14-evk board.
- Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7
SoCs.
- Fix DTC W=1 warnings by not using simple-audio-card,dai-link on
imx6qdl-gw551x and imx6q-gw54xx board.
- Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb.
- A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs
and boards from Kontron Electronics GmbH.
- A few patches from Michal Vokáč to enable more devices support on
imx6dl-yapp4 board.
- A patch series from Philippe Schenker to improve i.MX6/7 Apalis and
Colibri board support.
- A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev
device tree with more devices added and adopting DRM bindings for
display.
- Random improvements, clean-up and device additions on various boards.
* tag 'imx-dt-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (68 commits)
ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation
ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes
ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'
ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S'
ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file
ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver
ARM: dts: Add support for two more Kontron SoMs N6311 and N6411
ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file
ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock source
ARM: dts: imx: add devicetree for Kobo Clara HD
ARM: dts: add Netronix E60K02 board common file
ARM: dts: vf-colibri: fix typo in top-level module compatible
ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panel
ARM: dts: imx53: Spelling s/configration/configuration/
ARM: dts: imx6ul-14x14-evk: Assign power supplies for magnetometer
ARM: dts: imx6ul-14x14-evk: Fix the magnetometer node name
ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator
ARM: dts: imx6ul: Disable gpt2 by default
ARM: dts: imx7d: Add missing cooling device properties for CPUs
ARM: dts: imx6dl: Add missing cooling device properties for CPUs
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX SoC update for 5.5:
- Add arm64 Kconfig option for the NXP S32 platform.
- Drop imx_anatop_usb_chrg_detect_disable() function which becomes
unneeded, since all the necessary charger setup is done by the USB
PHY driver now.
- Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC
unique ID from OCOTP block.
- Replace i.MX machine specific coherency exit implementation using
the generic v7_exit_coherency_flush() function.
* tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: use generic function to exit coherency
ARM: imx: Add serial number support for i.MX6/7 SoCs
ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
arm64: Introduce config for S32
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX drivers update for 5.5:
- Skip return check for those SCU firmware APIs that are defined as
void function in firmware.
- Use established serial_number attribute instead of custom one to show
SoC's unique ID for i.MX8 SoC drivers.
- Read i.MX8MQ SOC revision from TF-A which parses ROM and exposes the
value through a SMC call. This improves the situation that SOC
revision reports 'unknown' on some older revisions.
- Add a check and warn on unexpected SCU RX to avoid potential stack
corruption in imx-scu driver.
- Fix a sparse warning in imx-scu-irq driver by adding missing header.
- Remove an unneeded call to devm_of_platform_populate() from imx-dsp
driver.
* tag 'imx-drivers-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8mq: Read SOC revision from TF-A
soc: imx-scu: Using existing serial_number instead of UID
soc: imx8: Using existing serial_number instead of UID
firmware: imx: add missing include of <linux/firmware/imx/sci.h>
firmware: imx: Remove call to devm_of_platform_populate
firmware: imx: Skip return value check for some special SCU firmware APIs
firmware: imx: warn on unexpected RX
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Samsung soc drivers changes for v5.5
1. Minor fixes to Exynos Chipid driver.
2. Add Exynos Adaptive Supply Voltage driver allowing to adjust voltages
used during CPU frequency scaling based on revision of SoC. This
also pulls dependency from PM/OPP tree - driver uses newly added
dev_pm_opp_adjust_voltage() function.
* tag 'samsung-drivers-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-asv: Potential NULL dereference in exynos_asv_update_opps()
soc: samsung: chipid: Drop "syscon" compatible requirement
soc: samsung: Add Exynos Adaptive Supply Voltage driver
PM / OPP: Support adjusting OPP voltages at runtime
soc: samsung: chipid: Make exynos_chipid_early_init() static
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
A few more DT patches for 5.5, mostly:
- USB3 support for the H6
- Deinterlacer support for the H3
- eDP Bridge support on the Teres-I
- More DT cleanups thanks to the validation
* tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Remove useless reset name
ARM: dts: sun6i: Remove useless reset-names
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
arm64: dts: allwinner: h6: add USB3 device nodes
dt-bindings: Add ANX6345 DP/eDP transmitter binding
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I
dts: arm: sun8i: h3: Enable deinterlace unit
ARM: dts: sunxi: h3/h5: Add MBUS controller node
dt-bindings: bus: sunxi: Add H3 MBUS compatible
Link: https://lore.kernel.org/r/58ad00a8-9579-4811-969a-a74e331ee9a2.lettre@localhost
Signed-off-by: Olof Johansson <[email protected]>
One patch to add back the PMU node that was removed because the
interrupts were improper in a previous fixes PR.
* tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Re-add PMU node
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
ARM: dts: sun7i: Drop the module clock from the device tree
dt-bindings: media: sun4i-csi: Drop the module clock
media: dt-bindings: Fix building error for dt_binding_check
arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
arm64: dts: allwinner: a64: Drop PMU node
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Link: https://lore.kernel.org/r/45023fa6-b2bc-4934-b85c-3e7841dde0b1.lettre@localhost
Signed-off-by: Olof Johansson <[email protected]>
STM32 DT fixes for v5.4, round 2
Highlights:
-----------
Fixes for STM32MP157:
-Fix CAN RAM mapping
-Change stmfx pinctrl definition for joystick and camera. Due to
stmfx pinctrl fix done in v5.4-rc cycle, camera and joystick were no
longer functional.
* tag 'stm32-dt-for-v5.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX fixes for 5.4, 3rd round:
- Fix the GPIO number that is controlling core voltage on
imx8mq-zii-ultra board.
* tag 'imx-fixes-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
Link: https://lore.kernel.org/r/20191104084513.GW24620@dragon
Signed-off-by: Olof Johansson <[email protected]>
mvebu dt64 for 5.5 (part 1)
- Add new Marvell CN9130 SoC support (CN9130 is made of one AP807 and
one internal CP115, similar to the Armada 7K/8K using AP806 and
CP110).
- Reorganize EspressoBin device tree to add new variant of the boards
(Armada 3270 based)
- Add firmware node for turris Mox (Armada 3720 based)
* tag 'mvebu-dt64-5.5-1' of git://git.infradead.org/linux-mvebu: (23 commits)
arm64: dts: armada-3720-turris-mox: add firmware node
arm64: dts: marvell: add ESPRESSObin variants
arm64: dts: marvell: Add support for Marvell CN9132-DB
arm64: dts: marvell: Add support for Marvell CN9131-DB
arm64: dts: marvell: Add support for Marvell CN9130-DB
arm64: dts: marvell: Add support for Marvell CN9130 SoC support
arm64: dts: marvell: Add support for CP115
arm64: dts: marvell: Externalize PCIe macros from CP11x file
arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
arm64: dts: marvell: Prepare the introduction of CP115
arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment
arm64: dts: marvell: Add AP807-quad cache description
arm64: dts: marvell: Add AP806-quad cache description
arm64: dts: marvell: Add AP806-dual cache description
arm64: dts: marvell: Add support for AP807/AP807-quad
dt-bindings: marvell: Declare the CN913x SoC compatibles
dt-bindings: marvell: Convert the SoC compatibles description to YAML
arm64: dts: marvell: Move clocks to AP806 specific file
arm64: dts: marvell: Prepare the introduction of AP807 based SoCs
MAINTAINERS: Add new Marvell CN9130-based files to track
...
Link: https://lore.kernel.org/r/87zhhc3bo6.fsf@FE-laptop
Signed-off-by: Olof Johansson <[email protected]>
mvebu dt for 5.5 (part 1)
- Enable L2 cache parity and ECC on a Armada XP SoC family and allow
to use in on the Armada 38x SoCs too.
- Use correct name for the rs5c372a on synology (Kirkwood based)
- Rename "sa-sram" node to "sram" on dove
* tag 'mvebu-dt-5.5-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-xp: add label to sdram-controller node
ARM: dts: mvebu: add sdram controller node to Armada-38x
ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg
ARM: dts: dove: Rename "sa-sram" node to "sram"
ARM: dts: kirkwood: synology: Fix rs5c372 RTC entry
Link: https://lore.kernel.org/r/8736f44q9l.fsf@FE-laptop
Signed-off-by: Olof Johansson <[email protected]>
arm64: tegra: Device tree changes for v5.5-rc1
Adds support for DP and XUSB on various boards, enables SMMU support for
more devices and fixes a couple of DTC warnings and inconsistencies that
are reported at runtime.
These changes along with some of the driver changes in other branches
allow suspend/resume support on Tegra210 devices (e.g. Jetson TX1 and
Jetson Nano).
* tag 'tegra-for-5.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Add Jetson Nano SC7 timings
arm64: tegra: Add Jetson TX1 SC7 timings
arm64: tegra: Enable wake from deep sleep on RTC alarm
arm64: tegra: Add PMU on Tegra210
arm64: tegra: Add blank lines for better readability
arm64: tegra: Enable DisplayPort on Jetson AGX Xavier
arm64: tegra: p2888: Rename regulators for consistency
arm64: tegra: Enable DP support on Jetson TX2
arm64: tegra: Fix compatible for SOR1
arm64: tegra: Enable DP support on Jetson Nano
arm64: tegra: Add SOR0_OUT clock on Tegra210
arm64: tegra: Assume no CLKREQ presence by default
arm64: tegra: Enable SMMU for VIC on Tegra186
arm64: tegra: Enable XUSB host controller on Jetson TX2
arm64: tegra: Enable SMMU for XUSB host on Tegra186
arm64: tegra: Enable XUSB pad controller on Jetson TX2
arm64: tegra: Add ethernet alias on Jetson AGX Xavier
arm64: tegra: Fix compatible string for EQOS on Tegra194
arm64: tegra: Hook up edp interrupt on Tegra210 SOCTHERM
arm64: tegra: Fix base address for SOR1 on Tegra194
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM: tegra: Default configuration changes for v5.5-rc1
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
* tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM: tegra: Device tree changes for v5.5-rc1
Adds support for CPU frequency scaling on Tegra20 and Tegra30, EMC
frequency scaling on Tegra30, SMMU support for VDE on Tegra30, the
STMPE ADC found on Toradex T30 modules as well as fixes for eDP
support on Venice2.
* tag 'tegra-for-5.5-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: cardhu-a04: Add CPU Operating Performance Points
ARM: tegra: cardhu-a04: Set up voltage regulators for DVFS
ARM: tegra: trimslice: Add CPU Operating Performance Points
ARM: tegra: paz00: Add CPU Operating Performance Points
ARM: tegra: paz00: Set up voltage regulators for DVFS
ARM: tegra: Add CPU Operating Performance Points for Tegra30
ARM: tegra: Add CPU Operating Performance Points for Tegra20
ARM: tegra: Add Tegra30 CPU clock
ARM: tegra: Add Tegra20 CPU clock
ARM: tegra: Add External Memory Controller node on Tegra30
ARM: tegra: nyan-big: Add timings for RAM codes 4 and 6
ARM: tegra: Connect SMMU with Video Decoder Engine on Tegra30
ARM: tegra: Add eDP power supplies on Venice2
ARM: tegra: Add SOR0_OUT clock on Tegra124
ARM: tegra: Add stmpe-adc DT node to Toradex T30 modules
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM: tegra: Core changes for v5.5-rc1
Contains two fixes for CPU idle and suspend/resume on early Tegra SoCs.
* tag 'tegra-for-5.5-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Use WFE for power-gating on Tegra30
ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
soc/tegra: Changes for v5.5-rc1
Adds wake event support on Tegra210, implements the NVMEM API for the
Tegra FUSE block and adds coupled regulators support for Tegra20 and
Tegra30.
* tag 'tegra-for-5.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Remove unnecessary memory barrier
soc/tegra: pmc: Query PCLK clock rate at probe time
soc/tegra: regulators: Add regulators coupler for Tegra30
soc/tegra: regulators: Add regulators coupler for Tegra20
soc/tegra: pmc: Configure deep sleep control settings
soc/tegra: pmc: Configure core power request polarity
soc/tegra: pmc: Add wake event support on Tegra210
soc/tegra: pmc: Support wake events on more Tegra SoCs
soc/tegra: fuse: Register cell lookups for compatibility
soc/tegra: fuse: Add cell information
soc/tegra: fuse: Implement nvmem device
soc/tegra: fuse: Restore base on sysfs failure
soc/tegra: pmc: Fix crashes for hierarchical interrupts
soc/tegra: fuse: Add FUSE clock check in tegra_fuse_readl()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
firmware: tegra: Changes for v5.5-rc1
This contains a single fix for suspend/resume on Tegra194.
* tag 'tegra-for-5.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Move BPMP resume to noirq phase
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
dt-bindings: Changes for v5.5-rc1
This contains various updates to device tree bindings and includes that
are related to driver changes in other Tegra branches.
* tag 'tegra-for-5.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller
dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller
dt-bindings: memory: tegra30: Convert to Tegra124 YAML
dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoCs
dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Renesas ARM64 DT updates for v5.5 (take two)
- Video-Input and Serial-ATA support on RZ/G2N,
- Color Management Module support on various R-Car Gen3 SoCs,
- Initial support for the R-Car M3-W+ (r8a77961) SoC on the
Salvator-XS board.
* tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
arm64: dts: renesas: Add Renesas R8A77961 SoC support
arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
dt-bindings: power: Add r8a77961 SYSC power domain definitions
arm64: dts: renesas: r8a774b1: Add SATA controller node
arm64: dts: renesas: rcar-gen3: Add CMM units
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Renesas ARM64 defconfig updates for v5.5 (take two)
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A77961 SoC
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Renesas ARM SoC updates for v5.5
- Drop legacy DT clock support on R-Car Gen2.
* tag 'renesas-arm-soc-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: rcar-gen2: Drop legacy DT clock support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Renesas ARM defconfig updates for v5.5
- Refresh shmobile_defconfig for v5.4-rc1.
* tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.4-rc1
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
PRM reset control dts changes for v5.5 merge window
This series of changes adds the PRM reset driver nodes for am3/4, omap4/5
and dra7 SoCs. The reset driver changes make it easier to add support for
various accelerators for TI SoCs in a more generic way.
Note that this branch is based on the PRM reset driver changes branch.
* tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: Add PRM data
ARM: dts: am43xx: Add PRM data
ARM: dts: am33xx: Add PRM data
ARM: dts: omap4: add PRM nodes
ARM: dts: dra7: add PRM nodes
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM64: hisilicon: defconfig updates for 5.5
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARM: mach-hisi: Hisilicon SoC updates for 5.5
- drop the ARCH_MULTI_V7 dependency in the sub-menu of ARCH_HISI
since ARCH_HISI depends on ARCH_MULTI_V7
* tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi:
ARM: hisi: drop useless depend on ARCH_MULTI_V7
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Realtek ARM64 based SoC DT for v5.5
Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs.
Add reset controllers for RTD129x and start using them for UARTs.
* tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: dts: realtek: Add RTD129x UART resets
arm64: dts: realtek: Add RTD129x reset controller nodes
dt-bindings: reset: Add Realtek RTD1295
arm64: dts: realtek: Add watchdog node for RTD129x
arm64: dts: realtek: Add oscillator for RTD129x
arm64: dts: realtek: Add RTD1296 and Synology DS418
dt-bindings: arm: realtek: Document RTD1296 and Synology DS418
arm64: dts: realtek: Add RTD1293 and Synology DS418j
arm64: dts: realtek: Change dual-license from MIT to BSD
dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j
dt-bindings: arm: realtek: Tidy up conversion to json-schema
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Realtek ARM64 based SoC for v5.5
Enable reset controllers and add a mailing list to MAINTAINERS.
* tag 'realtek-arm64-soc-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: realtek: Select reset controller
MAINTAINERS: Add mailing list for Realtek SoCs
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
* 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'
soc: ti: omap-prm: fix return value check in omap_prm_probe()
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable Altera GPIO controller
arm64: defconfig: enable rsu driver
arm64: defconfig: enable the Cadence QSPI controller
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
i.MX fixes for 5.4, 2nd round:
- Get SNVS power key back to work for imx6-logicpd board. It was
accidentally disabled by commit 770856f0da ("ARM: dts: imx6qdl:
Enable SNVS power key according to board design").
- Fix sparse warnings in IMX GPC driver by making the initializers
in imx_gpc_domains C99 format.
- Fix an interrupt storm coming from accelerometer on imx6qdl-sabreauto
board. This is seen with upstream version U-Boot where pinctrl is not
configured for the device.
- Fix sdma device compatible string for i.MX8MM and i.MX8MN SoC.
- Fix compatible of PCA9547 i2c-mux on LS1028A QDS board to get the
device probed correctly.
* tag 'imx-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
Link: https://lore.kernel.org/r/20191029110334.GA20928@dragon
Signed-off-by: Olof Johansson <[email protected]>
STM32 DT updates for v5.5, round 1
Highlights:
----------
MPU part:
-Add and enable ADC support on stm32mp157a-dk1
-Add DAC support on stm32mp157c-ed1
-Add and enable VREFBUF support on stm32mp157a-dk1
-Add focaltech touchscreen on stm32mp157c-dk2
-Add hdmi support on stm32mp157a-dk1
-Fix issues seen during YAML DT validation
-Fix regulators issues for all MPU boards
MCU part:
-Fix issues seen during YAML DT validation
* tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: remove useless dma-ranges property for stm32f469
ARM: dts: stm32: remove useless dma-ranges property for stm32f429
ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96
ARM: dts: stm32: Fix active discharge usage on stm32mp157
ARM: dts: stm32: change default minimal buck1 value on stm32mp157
ARM: dts: stm32: add PWR regulators support on stm32mp157
ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469
ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 board
ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board
ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards
ARM: dts: stm32: fix memory nodes to match with DT validation tool
ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
ARMv8 Juno update for v5.5
Single patch to add support for Mali GPU on all versions of Juno.
Though it's disabled by default, it is very useful to test panfrost
drivers.
* tag 'juno-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add GPU subsystem
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Reset controller updates for v5.5
This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3
resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and
Realtek RTD1195/RTD1295 resets.
It adds some reset controller API keywords for get_maintainers.pl and
makes a few remaining reset_control_ops const. Also included are
a conversion of the Qualcomm device tree bindings to yaml and a few
small kerneldoc improvements.
* tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux:
reset: document (devm_)reset_control_get_optional variants
reset: improve of_xlate documentation
reset: simple: Add Realtek RTD1195/RTD1295
reset: simple: Keep alphabetical order
MAINTAINERS: add reset controller framework keywords
reset: zynqmp: Make reset_control_ops const
reset: hisilicon: hi3660: Make reset_control_ops const
reset: build simple reset controller driver for Agilex
reset: add support for the Meson-A1 SoC Reset Controller
dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller
reset: uniphier-glue: Add Pro5 USB3 support
dt-bindings: reset: pdc: Convert PDC Global bindings to yaml
dt-bindings: reset: aoss: Convert AOSS reset bindings to yaml
reset: Remove copy'n'paste redundancy in the comments
reset: meson-audio-arb: add sm1 support
reset: dt-bindings: meson: update arb bindings for sm1
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Reset controller fixes for v5.5
This tag fixes a memory leak in reset_control_array_put(), which is
called by reset_control_put() for reset array controls. The other
patches are small kerneldoc comment fixes to avoid documentation build
warnings.
* tag 'reset-fixes-for-v5.5' of git://git.pengutronix.de/git/pza/linux:
reset: fix reset_control_ops kerneldoc comment
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
Olof Johansson